Product overview
RAK Hotspot V2. The RAK Hotspot V2 from RAKwireless is an indoor LoRaWAN gateway for the US915 band, built for the Helium LongFi network, providing network coverage and taking part in Proof-of-Coverage.
Main characteristics. It is based on a Semtech SX1302 LoRa concentrator and supports FSK and LoRa modulation. Sensitivity reaches -139 dBm at spreading factor 12 with 125 kHz bandwidth, -136 dBm at 250 kHz and -134 dBm at 500 kHz, all at spreading factor 12. Output power is 8 dBm at PWID control 0.
Antenna and cabling. The model ships with a 5.8 dBi fiber glass antenna (peak gain 2.8 dBi) and a 5 meter Pulsar cable, allowing placement near a window or on a balcony. Feed impedance is 50 Ohms and the VSWR is less than or equal to 1.5. An external LoRa antenna connector is provided.
Interfaces and connectivity. The gateway offers a Gigabit Ethernet port, USB-C power input, a TF card slot holding the system image and device data, a pairing button and red and green status LEDs.
Power and environment. It comes with a US standard power adapter. Typical standby consumption is 550 mA and LoRa Tx mode reaches 950 mA maximum. It operates from -10 °C to +55 °C and is stored between -40 °C and +85 °C.
Typical uses. This gateway suits an indoor LoRaWAN coverage point on the Helium network, connected to the site network over wired Ethernet.