RAK Hotspot V2 – Outdoor LoRaWAN gateway US915 with 5 dBi fiberglass antenna

Outdoor LoRaWAN gateway US915 with 5 dBi fiberglass antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • US915
  • Max: 940 mA
  • Max: 950 mA
  • Condition: FSK/LoRa
Manufacturer part number
A16053
Manufacturer
RAKwireless
Storage Temperature Range
Min.: -40 ÂşC; Max: +85 ÂşC
Frequency Range
Min: 863 MHz; Max: 870 MHz

The RAK Hotspot V2 is a LoRaWAN gateway for outdoor deployment in the US915 band, fitted with a 5 dBi fiberglass antenna and a Gigabit Ethernet connection.

Product overview

Overview. The RAKwireless RAK Hotspot V2 is a LoRaWAN concentrator gateway designed for outdoor deployment. This US915 kit ships with a 5 dBi fiberglass medium-coverage antenna and a US standard power plug.

Main characteristics. The radio module operates with FSK and LoRa modulation in the US915 frequency band. Sensitivity is -139 dBm for spreading factor 12 at 125, -136 dBm at 250 and -134 dBm at 500. Output power is 8 dBm with PWID Control set to 0 and -6 dBm with PWID Control set to 10. Antenna peak gain is 2.8 dBi and the voltage standing wave ratio (VSWR) is 1.5 or less with a feed impedance of 50 Ohms.

Interfaces and connectivity. The gateway provides a Gigabit Ethernet port for wired network connection, a LoRa antenna connector for the external antenna, a TF card slot holding the system image and device data, and a pairing button. LEDs indicate operating status, system activity during startup and power-on.

Power and environment. Power is supplied through a USB-C port. Standby consumption is typically 550 mA, LoRa transmit consumption reaches a maximum of 950 mA and burn test mode reaches a maximum of 940 mA. The operating temperature range is -10 °C to +55 °C and the storage temperature range is -40 °C to +85 °C. Permitted working conditions are -35 to +75 °C and 5 to 95 % relative humidity.

Typical use. This gateway is designed to receive LoRaWAN sensor and device frames in an outdoor area and forward them to the IP network over its Ethernet link. Transmit frequency variation is -3 kHz to +3 kHz and transmit power variation is -1.5 dBm to +1.5 dBm over the temperature range.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Frequency band: US915
  • Antenna: 5 dBi Fiber Glass Antenna/Medium coverage
  • Burn test mode: Max: 940 mA
  • Gigabit Ethernet: Provides wired network connectivity.
  • LED: Indicates the operating status of the device.
  • LoRa Antenna Connector: Connects the external LoRa antenna for LoRaWAN communication.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote