RAK Hotspot V2 – Indoor AU915 LoRaWAN gateway with 5.8 dBi fiberglass antenna

Indoor AU915 LoRaWAN gateway with 5.8 dBi fiberglass antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • LoRaWAN
  • Fiber optic and SFP
Manufacturer part number
A17007
Manufacturer
RAKwireless

Ready-to-use indoor AU915 LoRaWAN gateway for the Helium network, supplied with a 5.8 dBi fiberglass antenna and a 5 meter Pulsar cable.

Product overview

Overview. The RAK Hotspot V2 from RAKwireless is a ready-to-use LoRaWAN gateway for the Helium LongFi network, providing network coverage and taking part in Proof-of-Coverage. It is built around a Semtech SX1302 LoRa concentrator and a Raspberry Pi4, with 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0 and BLE.

Antenna and installation. This indoor AU915 version ships with a 5.8 dBi fiberglass antenna and a 5 meter Pulsar cable, allowing installation near a window or on a balcony without rooftop access. Peak gain is 2.8 dBi and VSWR is at most 1.5 at 50 Ohms feed impedance.

Connectivity and interfaces. A Gigabit Ethernet port provides wired connectivity, an external LoRa antenna connector accepts the antenna, and a TF card slot holds the system image and device data. A pairing button and status LEDs complete the interface.

Power and environment. Power is supplied through USB-C with an AU standard power adapter. Typical standby consumption is 550 mA and LoRa Tx mode reaches 950 mA maximum. The operating temperature range is -10 to +55 °C and the storage range is -40 to +85 °C.

Sensitivity and output. Sensitivity is -139 dBm at 125 kHz, -136 dBm at 250 kHz and -134 dBm at 500 kHz for spreading factor 12, with an output power of 8 dBm.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote