RAK Hotspot V2 – Indoor KR920 LoRaWAN gateway with 3 dBi fiber glass antenna

Indoor KR920 LoRaWAN gateway with 3 dBi fiber glass antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • KR920
  • Semtech® SX1302
  • Max: 940 mA
  • Max: 950 mA
Manufacturer part number
A18005
Manufacturer
RAKwireless
Storage Temperature Range
Min.: -40 ÂşC; Max: +85 ÂşC
Frequency Range
Min: 863 MHz; Max: 870 MHz

Indoor LoRaWAN gateway from RAKwireless for the Helium network, KR920 band, with Semtech SX1302 concentrator, 3 dBi fiber glass antenna and 1 meter Pulsar cable.

Product overview

Overview. The RAK Hotspot V2 from RAKwireless is a ready-to-use LoRaWAN gateway, supplied in the indoor KR920 bundle with a 3 dBi fiber glass antenna and a 1 meter Pulsar cable. It is built around the Semtech SX1302 LoRa concentrator and a Raspberry Pi 4.

Radio characteristics. The frequency range covered is 863 MHz to 870 MHz. The antenna peak gain is 2.8 dBi, with a VSWR of 1.5 or less and a 50 Ohms feed impedance. Sensitivity at Spreading Factor 12 is -139 dBm for 125, -136 dBm for 250 and -134 dBm for 500, and output power ranges from -6 dBm to 8 dBm depending on the setting.

Interfaces and connectivity. The gateway provides a Gigabit Ethernet port, an external LoRa antenna connector, a TF card slot holding the system image and device data, and a pairing button. LEDs indicate system activity during startup and the operating status.

Power and environment. Power is supplied through USB-C with a Korean standard power adapter. Consumption is 550 mA in standby and 950 mA maximum in LoRa Tx mode. The operating temperature range is -10 °C to +55 °C and the storage range is -40 °C to +85 °C.

Usage. This indoor version allows the gateway to be installed near a window or on a balcony without rooftop access, to provide LoRaWAN coverage for the Helium network.

See all specifications

Highlights

  • Frequency band: KR920
  • Antenna and Cable: 3 dBi Fiber Glass Antenna + 1 meter Pulsar Cable
  • Based on the LoRa Concentrator Engine: Semtech® SX1302
  • Burn test mode: Max: 940 mA
  • Gigabit Ethernet: Provides wired network connectivity.
  • LED: Indicates the operating status of the device.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote