Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RS-COD-N01-2*-500-T – UV double-wavelength COD sensor for water quality

UV double-wavelength COD sensor for water quality

Conductivity Sensors

  • RS-485
Manufacturer part number
COD-SENSOR
Manufacturer
Renke

Chemical oxygen demand (COD) sensor using dual-wavelength ultraviolet absorption for continuous water quality monitoring. RS485 output with built-in turbidity measurement.

Product overview

Overview. The Renke RS-COD-N01-2*-500-T is a chemical oxygen demand (COD) sensor that measures COD in solutions using the dual-wavelength ultraviolet absorption method. It requires no chemical reagents, which prevents secondary pollution.

Main characteristics. COD measuring range of 0~500 mg/L equivalent KHP and turbidity measuring range of 0~200 NTU, with a resolution of 0.1 mg/L and a repeatability of ±1%FS equivalent KHP (25℃). Accuracy is ±5%FS equivalent KHP (25℃). Response time is 20 seconds or less. The dual optical path measurement compensates for the influence of turbidity on COD readings, and the modulated light signal reduces light interference. A built-in temperature transmitter provides automatic temperature compensation.

Interfaces and connectivity. The sensor supports RS485, 4-20 mA, 0-5 V and 0-10 V outputs. The Modbus communication address can be configured and the baud rate can be adjusted. It can be connected to an environmental monitoring host or, through an RS485 to USB converter, to the customer's upper computer software for real-time monitoring.

Power and environment. DC 12~30 V power supply, with consumption of 0.6 W in normal operation and 4.5 W during cleaning. Protection level IP68 for the electrode and IP65 for the conversion module. Working temperature 0~40℃ and pressure resistance below 0.1 MPa.

Maintenance. Integrated automatic cleaning system that limits biofouling, with a self-cleaning life of 18 months and a maintenance frequency of 3 months. The standard electrode line length is 5 m, customizable on request.

Typical uses. Water quality monitoring in water treatment, aquaculture and environmental monitoring. Paired with a portable analyzer, data can be read on the LCD screen; through a cloud platform, remote supervision is possible via app, PC or tablet.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Conductivity Sensors
Request a quote