Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
RS-WS-*-9TH-T – Duct temperature and humidity sensor for HVAC
Duct temperature and humidity sensor for HVAC
- RS-485
- Modbus
- Manufacturer part number
- DUCT-TEMPERATURE-SENSOR
- Manufacturer
- Renke
Duct-mounted temperature and relative humidity sensor for measuring air in HVAC ductwork, with analog or RS485 Modbus RTU outputs.
Product overview
Renke RS-WS-*-9TH-T. HVAC duct sensor measuring air temperature and relative humidity inside ventilation ducts.
Probe and filter. the probe at the base of the housing is inserted into the air stream of the duct and fitted with a 25 µm high-strength stainless steel filter, which lets gas molecules through while blocking dust particles and water droplets.
Outputs and settings. two output modes are available: analog and Modbus RTU over RS485. The analog version has four DIP terminals at the top of the circuit board to select the temperature range, replaceable on site: -40~80 ℃, -35~35 ℃, -35~50 ℃, 0~50 ℃, among others. The RS485 version uses the same DIP terminals to change the device address. Two variants are offered: the standard RS-WS-*-9TH-T and the LCD display version RS-WS-*-9TH-OLED-T.
Installation and sealing. the housing is waterproof and mounted by flange. A high-quality silicone sealing ring ensures a seal between the device and the exhaust pipe, reducing gas leakage and preserving measurement accuracy. Military-grade spring-type screw-free terminals accept wire sections of 0.3 to 2.0 mm² and connect by pressing.
Power and environment. 10 to 30 V DC supply, with a maximum consumption of 0.1 W on RS485 and 1.3 W on analog output. Special EMC anti-interference devices allow operation under strong electromagnetic interference, and the wide voltage range supports centralized power supply over long distances.
Measurement characteristics. measuring range -40 ℃ to +80 ℃ and 0 to 100 %RH, accuracy ±0.5 ℃ at 25 ℃ and ±3 %RH at 60 %RH and 25 ℃. Long-term stability of 0.1 ℃/y and 1 %RH/y; response time of 25 s for temperature and 8 s for humidity at 1 m/s wind speed. Operating temperature -20 ℃ to +60 ℃. Output signals: RS485, 4-20 mA, 0-5 V or 0-10 V.
Technical questions
No published question about this part yet. Questions are reviewed before publication.
Compliance, lifecycle and traceability
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
Lifecycle and product statusStatus not stated
- In production
- Not recommended for new designs
- End of life
- Obsolete
| Current status | Status not stated |
| Key dates | Not recorded |
Manufacturer references
| Manufacturer part number | DUCT-TEMPERATURE-SENSOR |
| Manufacturer | Renke |