RS-ORP-N01-3-T – Integrated ORP sensor with RS485 Modbus-RTU output

Integrated ORP sensor with RS485 Modbus-RTU output

ORP Sensors

  • 0~80℃
  • 0.3W
  • 1 year
  • 0.6MPa
Manufacturer part number
ORP-SENSOR
Manufacturer
Renke
Power consumption
0.3W
Electrode service life
1 year

Integrated oxidation reduction potential (ORP) sensor with a platinum combination electrode and RS485 Modbus-RTU output, designed for online water quality monitoring.

Product overview

Renke RS-ORP-N01-3-T. integrated ORP sensor measuring oxidation reduction potential, with RS485 output using the standard Modbus-RTU protocol, designed for online measurement in aqueous solutions.

Measurement. ORP measurement range of -1999 to 1999 mV with a resolution of 1 mV and a measurement error of ≤±5 mV (25 ℃, 222 mV standard solution). Temperature measurement range of 0 to 60 ℃ with a resolution of 0.1 ℃ and an error of ±0.5 ℃.

Communication and outputs. RS485 interface with Modbus-RTU protocol, default baud rate of 4800, adjustable from 1200 to 115200 bauds. Signal outputs available as 4-20 mA, 0-5 V and 0-10 V.

Power and environment. DC power supply of 7 to 30 V, power consumption of 0.3 W. Protection class IP68. Operating conditions of 0 to 60 ℃, electrode operating temperature of 0 to 80 ℃, pressure resistance of 0.6 MPa. Component temperature and relative humidity resistance of -20 ℃ to +80 ℃ and 0 % to 95 % RH, non-condensing.

Installation. Default cable length of 5 m, customizable on request, and default electrode wire length of 5 m, customizable to 10 m, 15 m or 20 m. Electrode service life stated as 1 year.

Typical uses. Online monitoring of redox potential in industrial wastewater, river, lake and aquaculture water, with the RS485 Modbus-RTU output allowing connection to a computer or a centralised supervision system.

See all specifications

Highlights

  • Cable Length: Default 5m (Other lengths can be customized)
  • Component temp and RH resistance: -20℃~+80℃, 0%RH~95%RH (Non-condensing)
  • Electrode operating temperature: 0~80℃
  • Electrode service life: 1 year
  • Electrode wire length: default 5m (10m, 15m, 20m customizable)
  • Electrode withstand voltage: 0.6MPa

Good to know before integrating

  • Thermal: rated operating range 0~80℃ — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote