RS-LSD-*-1-T – Laser snow depth sensor with RS485 Modbus output

Laser snow depth sensor with RS485 Modbus output

General Industrial Sensors & Transmitters

  • 0.05~2.5m
  • ±1mm
  • Ⅱ class
  • 635nm,<1mw
Manufacturer part number
SNOW-DEPTH-SENSOR
Manufacturer
Renke
Range
0.05~2.5m
Max Power Consumption
0.8W (3.5W when heating)

Laser snow depth sensor using phase-method ranging, with RS485 Modbus output, for weather stations and outdoor environmental monitoring.

Product overview

Renke RS-LSD-*-1-T. laser snow depth sensor. This digital sensor measures the depth of unmelted snow at a fixed location, that is the vertical distance from the snow surface to the ground, expressed in centimetres by the manufacturer. It works on phase-method laser ranging.

Main characteristics. Accuracy of ±1 mm and resolution of 1 mm, with a measuring range of 0.05 to 2.5 m. Single measurement time of 0.05 to 1 S. The class II laser, 635 nm type, under 1 mW, produces a point spot of 5 mm at 10 m or a line spot of 3 mm x 150 mm at 10 m.

Interfaces and connectivity. RS485 signal output with Modbus protocol.

Power and environment. DC 10-30 V power supply. Maximum power consumption of 0.8 W, rising to 3.5 W when heating. Automatic heating switches on when the temperature is below 0 °C to prevent freezing. Operating range from -40 °C to +50 °C, 0% to 95% RH non-condensing. Housing rated IP65.

Typical uses. Weather stations, flow monitoring, traffic and aviation monitoring, agricultural production monitoring. The sensor can be installed alone on a pole or combined with other weather sensors, and requires no angle adjustment at installation.

Integration. The RS485 Modbus connection allows integration into a PLC or supervision system.

See all specifications

Highlights

  • Accuracy: ±1mm
  • Laser Class: Ⅱ class
  • Laser Type: 635nm,<1mw
  • Max Power Consumption: 0.8W (3.5W when heating)
  • Model: RS-LSD-*-1-T
  • Output signal: RS485 (Modbus protocol)

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote