RS-DIP-*-1-T – Multi-axis tilt sensor with RS485 output

Multi-axis tilt sensor with RS485 output

Tilt and Inclination Sensors

  • ≤0.15W
  • 4-20mA/0-5V/0-10V
  • 10~30V DC
  • IP65
Manufacturer part number
TILT-SENSOR
Manufacturer
Renke
Max Power Consumption
≤0.15W
Cable Length
Default 60cm, customizable.

The Renke RS-DIP-*-1-T tilt sensor measures the slope, angle or tilt of an object relative to the horizontal plane, based on static gravitational acceleration. It suits industrial inclination monitoring.

Product overview

Overview. The Renke RS-DIP-*-1-T is a multi-axis tilt sensor (inclinometer) that measures the slope, angle or tilt of an object based on gravity. It converts angle changes by measuring static gravitational acceleration, to determine the tilt rate and angle of the sensor relative to the horizontal plane.

Main characteristics. The sensor uses a Kalman filtering algorithm for more accurate measurement data. Its angle measurement range is wide: X from -180° to 180°, Y from -90° to 90° and Z from -180° to 180°, depending on configuration. Response time is under 1 s and temperature drift is ±(0.5° to 1°) between -40 °C and +60 °C.

Interfaces and connectivity. Available outputs are RS485, 4-20 mA, 0-5 V and 0-10 V. Free configuration software allows setting the address and baud rate, reading data and performing zero-point calibration. The cable is 60 cm by default and can be customized.

Power and environment. Supply voltage is 10 to 30 V DC, with a maximum consumption of 0.15 W or less. The housing has an IP65 protection rating. The sensor operates between -40 °C and 80 °C, at 0 to 95 % RH non-condensing.

Typical uses. Inclination monitoring of buildings, bridges, tunnels and dams, inclination compensation of weighing systems, drilling inclination control.

Integration. The sensor ships in the horizontal orientation by default. For vertical installation, configure it in the software by selecting "Vertical" and then calibrate before use. Incorrect installation or an uneven mounting surface causes measurement errors.

See all specifications

Highlights

  • Cable Length: Default 60cm, customizable.
  • Component operating environment: -40℃~80℃, 0~95%RH (non-condensing)
  • Max Power Consumption: ≤0.15W
  • Measure range — X-axis: -180°~180°, Y-axis: -90°~90°, Z-axis: -180°~180°: X-axis: -90°~90°, Y-axis: -90°~90°
  • Model: RS-DIP-*-1-T
  • Output signal — RS485: 4-20mA/0-5V/0-10V

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote