Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RS-SS-N01-2/3-*-T – Optical total suspended solids sensor with RS485 output

Optical total suspended solids sensor with RS485 output

pH and Conductivity Analyzers

  • RS-485
Manufacturer part number
TSS-SENSOR
Manufacturer
Renke

Renke optical total suspended solids (TSS) sensor for continuous measurement of solids concentration in water, with RS485 output and IP68 protection rating.

Product overview

Overview. The Renke RS-SS-N01 total suspended solids sensor is an optical TSS sensor that measures the concentration of suspended solids in water by light scattering, without chemical reagents.

Main characteristics. Measurement ranges of 0 to 5000 mg/L, 0 to 1000 mg/L and 0 to 200 mg/L, resolution of 0.1 mg/L, measurement error of ±5%F.S. depending on sludge homogeneity, response time of 30 s or less. Built-in temperature transmitter with automatic compensation. Recommended maintenance frequency every 3 months.

Interfaces and connectivity. RS485 signal output for integration into a supervision system. Electrode cable of 5 m by default, length customisable.

Power and environment. DC 10 to 30 V power supply. Power consumption of 0.2 W, 1.2 W in normal operation and 4.5 W when the self-cleaning system is working. IP68 waterproof rating, operating temperature of 0 to 40 ℃, pressure resistance below 0.1 MPa, flow rate below 3 m/s.

Typical uses. Water quality monitoring in wastewater and industrial water treatment, connected by RS485 to a PLC or supervision system.

Integration. Corrosion-resistant plastic casing for this version, with an NPT 3/4 thread for installation on a mounting pipe or connection to a portable water quality analyzer.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote