Dual-band omnidirectional antenna for 144/430 MHz Retevis base station and repeater radios, 5.5/8.5 dBi gain, fiberglass radome, maximum power 200 W.
Frequency144/430MHz
Applicable coaxial cableRetevis CA31 CA32
ConnectorSL16-K
Gain5.5/8.5dBi
High gain5.5/8.5dbi
Impedance50Ω
Product overview
Retevis MA05 base station antenna. the Retevis MA05 is a dual-band omnidirectional base station and repeater antenna operating at 144 MHz and 430 MHz, suited to VHF/UHF Retevis radios.
Main characteristics. gain of 5.5 dBi at 144 MHz and 8.5 dBi at 430 MHz, 50 Ω impedance, VSWR less than 1.5, length of 2.2 m and net weight of 1450 g. It supports a maximum power of 200 W and a pole diameter between 30 mm and 62 mm.
Construction. fiberglass (FRP) radome, waterproof and corrosion-resistant, protected against ultraviolet and wind. The pure copper vibrator and three-section detachable design make installation and transport easier.
Connectivity and compatibility. SL16-K connector, compatible with Retevis CA31 and CA32 coaxial cables, and with Retevis RT97, RT9550, RT92 radios and the RT74 repeater.
Typical uses. VHF/UHF base station or repeater equipment for long-range communication in the 2 m and 70 cm bands.
Dual-band omnidirectional antenna for 144/430 MHz Retevis base station and repeater radios, 5.5/8.5 dBi gain, fiberglass radome, maximum power 200 W.
Frequency144/430MHz
Applicable coaxial cableRetevis CA31 CA32
ConnectorSL16-K
Gain5.5/8.5dBi
High gain5.5/8.5dbi
2. Datasheet extract (recorded values)
Parameter
Value
Applicable coaxial cable
Retevis CA31 CA32
Applicable models
Retevis RT97, RT9550, RT92. RT74 repeater, reply, base station radio
Connector
SL16-K
Frequency
144/430MHz
Gain
5.5/8.5dBi
High gain
5.5/8.5dbi
Impedance
50Ω
Length
2.2M
Max power
200W
Model
MA05
Net weight
1450g
Pole diameter
Ø30~Ø62 mm
Radome Material
Fiberglass
Support maximum power
200W
VSWR
Less1.5
Applications and use cases
Architectures in which MA05 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Warehouses, basements and metal buildings block the mobile signal. A signal booster with an outdoor antenna and indoor antennas brings the operator’s signal inside where it is missing
To check
Bands and operators to cover
Outdoor signal level where the donor antenna will be installed
Indoor area and layout to cover
Associated system blocks
Signal boosterAntennasCables
Need a complete solution?
Send a request for MA05 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details