Overview. The Rion AKM392 triaxial vibration sensor is a digital accelerometer built on a monocrystalline silicon capacitive sensor, designed for vibration measurement and shock testing. It measures the X, Y and Z axes, with measurement ranges of ±2, ±4, ±8, ±10, ±20 and ±40 g.
Main characteristics. Bandwidth of 500 Hz at 3 dB, resonant frequency of 2.4 to 5.5 kHz, resolution below 1 mg (max) at 1 Hz, nonlinearity below 0.5 % FS (max) on the lower ranges, and noise density of 21 to 86.6 μg/√Hz. The sensor shows a deviation calibration below 1 mg and a temperature coefficient of 0.01 %/℃ (typical).
Interfaces and connectivity. Outputs RS232, RS485 or TTL, with RION 68 protocol and MODBUS RTU protocol. The automatic output rate is 5 Hz to 1000 Hz in RION 68 protocol and 10 Hz, 25 Hz or 50 Hz in automatic MODBUS. Several sensors can be connected in series over long distances, each with its own address code.
Power and environment. Supply of 9 to 36 VDC, current consumption below 60 mA at 12 VDC. Protection rating IP67, shock resistance of 100 g for 11 ms (half sine wave, triaxial) and vibration resistance of 20 g RMS between 20 and 2000 Hz. Aerospace aluminium housing, dimensions 36 × 32 × 24 mm, weight up to 116 g, with a magnetic base of up to 50 g.
Typical uses. Crash recording, fatigue monitoring and prediction, traffic system monitoring and high-speed railway fault detection, large machinery and engine monitoring, low frequency vibration monitoring, medical equipment, bridges and cars.
Integration. Mounting by four M4 screws or by magnetic base. The sensor can be connected directly to a PLC or gateway through its RS485 or RS232 port using MODBUS RTU protocol.