HCA516T – Single-axis high precision inclinometer with CANopen output

Single-axis high precision inclinometer with CANopen output

Condition Monitoring Sensors

  • PARAMETERS: XY
Manufacturer part number
SINGLE
Manufacturer
Rion
Operating temperature
MIN: -40; MAX: +85; UNIT: ℃
Storage Temp
MIN: -40; MAX: +85; UNIT: ℃

Single-axis industrial inclinometer with CANopen output for measuring tilt relative to the horizontal on equipment exposed to strong vibrations.

Product overview

Overview. The Rion HCA516T is a single-axis inclinometer with CANopen output from the high precision series of the manufacturer Rion. It measures the tilt angle of its sensor relative to the horizontal, with a resolution of 0.001° and a measurement accuracy of 0.005° at 25 °C.

Main characteristics. The measurement range is ±10° to ±35°, and the output rate is selectable among 5 Hz, 15 Hz, 35 Hz and 50 Hz. The response time is 0.02 s and the power-on time 0.5 s. The sensitivity temperature coefficient is at most 50 ppm/°C and the zero temperature coefficient is ±0.002°/°C over -40 to 85 °C. Long-term stability is 0.01° to 0.02°.

Interfaces and connectivity. The output is CANopen. The standard cable is 1 m long, shielded 4 x 0.4 mm², with an aviation connector, wear-resistant and designed for a wide temperature range.

Power and environment. The supply voltage ranges from 9 V to 36 V, with standard values of 12 V or 24 V. The working current is 50 mA with no load. The operating temperature range is -40 °C to +85 °C, and the storage temperature range is the same. The housing offers an IP67 protection grade and withstands a shock of 100 g for 11 ms on three axes, as well as vibrations of 10 grms between 10 and 1000 Hz. The weight is at most 210 g, cable excluded. The insulation resistance is at least 100 MΩ.

Compliance. Electromagnetic compatibility conforms to EN 61000 and GB/T 17626. The MTBF is at least 50,000 hours.

Typical uses. Tilt monitoring of construction machinery, control of geological equipment, ship attitude measurement, machine orientation and monitoring of railway equipment, according to the applications indicated by the manufacturer.

Integration. The sensor connects to a CANopen network. The housing measures 90 x 59.7 x 34 mm and is installed with three M4 screws.

See all specifications

Highlights

  • Measure axis: PARAMETERS: XY

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range MIN: -40; MAX: +85; UNIT: ℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote