M1200 – Industrial 4G LTE Cat-4 cellular router with RS-232/RS-485

Industrial 4G LTE Cat-4 cellular router with RS-232/RS-485

4G LTE / LTE-A Industrial Routers

  • -40 – +70 °C
  • 16MB
  • 3MB
  • 64MB
Manufacturer part number
M1200
Manufacturer
Robustel
Operating Temperature
-40 – +70 °C
Flash
16MB

The Robustel M1200 is an LTE Cat-4 industrial cellular gateway that runs as a traditional modem or as a smart gateway. It connects existing serial systems to an IP network.

Product overview

Robustel M1200. The Robustel M1200 is an industrial 4G LTE Cat-4 cellular router combined with an IoT gateway, designed to connect serial equipment to an IP network. It supports 2G, 3G and 4G/LTE Cat-4 networks and provides TCP/IP connectivity.

Operation. In Bridge Mode, the device passes the public IP address via the serial or mini-USB port, with no change to existing applications. In gateway mode, it provides dual-SIM resilience, transparent TCP/UDP transmission and Modbus RTU-to-TCP conversion.

Connectivity. RS-232 and RS-485 serial interfaces, 2 digital inputs (DI) and 1 digital output (DO) with wet contact, one USB 2.0 port and two Mini SIM (2FF) cards. VPN protocols IPsec, OpenVPN, GRE and WireGuard. Remote management via Web, CLI, SMS and RCMS.

Power and environment. Input of 9 to 36 V DC with reverse polarity protection, power consumption of 1 W idle and 4 W maximum at 12 V. Operating range from -40 to +70 °C, ingress protection IP30.

Typical uses. Backhaul of smart meters over RS-485 with Modbus, connection of programmable logic controllers, and DI/DO alarm collection in control cabinets or remote field sites.

Integration. Mounts on 35 mm DIN rail, on a wall or on a desktop. Compatible with Modbus RTU and Modbus TCP networks.

See all specifications

Highlights

  • Dimensions: 28.5 x 75 x 85 mm
  • Absolute Maximum VDC: “V+” DC (DI), 30 V DC (DO)
  • Antennas: 1 (MAIN)
  • Baud rate: 3000 bps ~ 115200 bps
  • Connector: SMA-K
  • CPU: ARM 300MHz

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40 – +70 °C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote