TF03-100 – Industrial long-range LiDAR distance sensor

Industrial long-range LiDAR distance sensor

LiDAR Sensors

  • -25~60℃
  • UART/CAN
  • LVTTL(3.3V)
  • 5V~24V
Manufacturer part number
101060004
Manufacturer
Seeed Studio
Communication interface
UART/CAN
Peak Current
150mA

Industrial pulse-based LiDAR sensor for distance measurement up to 100 m, with an IP67 aluminum enclosure and configurable UART/CAN interfaces.

Product overview

Overview. The TF03-100 LiDAR from Seeed Studio is an industrial-grade single-point distance sensor based on pulse time of flight (PTOF), with a maximum detection range of 100 m.

Main characteristics. Accuracy of ±10 cm within 10 m and 1% beyond, distance resolution of 1 cm, repeatability 1σ below 3 cm, and adjustable frame rate from 1 Hz to 1000 Hz (100 Hz by default). The field of view is 0.5° and the light source is a 905 nm laser diode, Class 1 according to EN60825.

Interfaces and connectivity. UART or CAN communication interfaces, LVTTL logic level (3.3 V), with several configurable baud rates.

Power and environment. Supply voltage of 5 V to 24 V, power consumption of 1 W or less, average current of 150 mA or less at 5 V. IP67 aluminum alloy enclosure, operating temperature from -25 to 60 °C, storage temperature from -40 to 85 °C, ambient light immunity of 100 klux. Dimensions 44 × 43 × 32 mm, weight 89 g ±3 g, 70 cm cable.

Typical uses. Vehicle collision avoidance and safety warning systems, traffic flow statistics, camera trigger, and UAV-assisted takeoff and landing.

Integration. The sensor connects to a microcontroller or controller through its UART or CAN interface, and its operating parameters can be changed through its built-in operating modes.

See all specifications

Highlights

  • Dimensions: 44mm*43mm*32mm(L*W*H)
  • Average Current: ≤150mA @ 5V, ≤80mA @ 12V, ≤50mA @ 24V
  • Cable Length: 70cm
  • Communication interface: UART/CAN
  • Communication interface; level: LVTTL(3.3V)
  • Electrical; Parameters — Supply voltage: 5V~24V

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 5V~24V.
  • Thermal: rated operating range -25~60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote