TF-Luna – Compact time-of-flight LiDAR distance sensor

Compact time-of-flight LiDAR distance sensor

LiDAR Sensors

  • -10°C~60°C
  • UART, I2C
  • UART / I2C
  • 5V±0.1V
Manufacturer part number
101990656
Manufacturer
Seeed Studio
Operating Temperature
-10°C~60°C
Operating Range
0.2m -8m; @90%reflectivity

The Seeed Studio TF-Luna LiDAR module is a single-point time-of-flight (TOF) distance sensor for stable, accurate short-range measurement at high frame rate.

Product overview

Overview. The Seeed Studio TF-Luna is a single-point LiDAR module based on the time-of-flight (TOF) principle, designed for stable, accurate distance detection at a high frame rate.

Main characteristics. The sensor offers an operating range of 0.2 m to 8 m at 90% reflectivity, an accuracy of ±6 cm between 0.2 m and 3 m and ±2% between 3 m and 8 m, with a distance resolution of 1 cm. Its frame rate is 1 to 125 Hz and its field of view is 2°. It uses a VCSEL light source at 850 nm and reaches an ambient light immunity of 70 Klux. It is rated Class 1 laser safety under IEC60825.

Interfaces and connectivity. The module provides UART and I2C interfaces, with an LVTTL (3.3 V) communication level. Firmware can be upgraded through the TTL-USB connection with a PC. Configurations and parameters can be adjusted to suit application needs.

Power and environment. It runs from 5 V ±0.1 V, with an average current of 70 mA or less, a peak current of 150 mA and a power consumption of 0.35 W or less. Its operating temperature ranges from -10 °C to 60 °C and its storage temperature from -20 °C to 75 °C. The housing is made of ABS+PC and the weight is under 5 g.

Typical uses. The module suits robot and UAV obstacle avoidance, UAV altitude holding, intrusion detection, level measurement, as well as smart city and industrial applications.

Integration. Its dimensions of 35 × 21.2 × 12.5 mm make it easy to integrate into compact LiDAR projects. Supplied with one TF-Luna LiDAR module and one 6-pin communication cable.

See all specifications

Highlights

  • Supply voltage: 5V±0.1V
  • Communication interface: UART, I2C
  • Dimensions (L × W × H): 35*21.2*12.5mm
  • Distance resolution: 1cm
  • Electrical; Parameters — Average current: ≤70mA
  • Electrical; Parameters — Communication interface: UART / I2C

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 5V±0.1V.
  • Power: plan for a supply compatible with 5V±0.1V.
  • Thermal: rated operating range -10°C~60°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote