320160016 – 2 W SMA RF Attenuator 10 dB
2 W SMA RF Attenuator 10 dB
- DC - 6.0 GHz
- 2 Watt (+33dBm)
- 10 dB
- SMA male – female
- Manufacturer part number
- 320160016
- Manufacturer
- Seeed Studio
- Frequency Range
- DC - 6.0 GHz
- Rated power
- 2 Watt (+33dBm)
10 dB SMA RF attenuator rated 2 W, used to reduce the input power of a spectrum analyser and protect its SMA input port from unknown strong signals.
- Frequency RangeDC - 6.0 GHz
- Rated power2 Watt (+33dBm)
- Attenuation10 dB
- Connector TypeSMA male – female
- Impedance (Nominal)50Ω
- Part list6GHz 2W SMA Attenuator - 10dB 1
Product overview
Seeed Studio 10 dB SMA RF attenuator. the 320160016 is an SMA male-female RF component covering DC to 6.0 GHz with a nominal impedance of 50 Ω.
Main characteristics. It provides 10 dB of attenuation, a tolerance of +/- 0.5 dB maximum and a maximum V.S.W.R of 1.22:1. Its power rating is 2 W (+33 dBm).
Connectivity. The connector is SMA male-female, with a directional design.
Typical use. This attenuator reduces the signal level at the input of an RF measurement device, such as the RF Explorer, so that stronger signals can be measured. It can also protect the input SMA port when unknown strong signals may be present in the environment, and it is used on demand.
Integration. The wide broadband frequency application and easy maintenance make it straightforward to fit into an existing RF setup.
Highlights
- Rated power: 2 Watt (+33dBm)
- Attenuation: 10 dB
- Connector Type: SMA male – female
- Frequency Range: DC - 6.0 GHz
- Impedance (Nominal): 50Ω
- Part list: 6GHz 2W SMA Attenuator - 10dB 1
Good to know before integrating
- Power: plan for a supply compatible with 2 Watt (+33dBm).
See also
- DocumentDatasheet page
Technical questions
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for 320160016, with where it comes from. Use the filters to find one quickly.
All specifications (8)
| Characteristic | Value |
|---|---|
| Rated power | 2 Watt (+33dBm) |
| Attenuation | 10 dB |
| Connector Type | SMA male – female |
| Frequency Range | DC - 6.0 GHz |
| Impedance (Nominal) | 50Ω |
| Part list | 6GHz 2W SMA Attenuator - 10dB 1 |
| Tolerance | +/- 0.5dB/max |
| V.S.W.R (MAX) | 1.22 : 1 |
No specification matches.
Last verification : 2026-10-31
Technical documentation
Official documents and the technical data recorded for 320160016. For a missing document or a specific revision, our experts send it to you.
Contents
Overview Datasheet extract Official documents1. Technical overview
10 dB SMA RF attenuator rated 2 W, used to reduce the input power of a spectrum analyser and protect its SMA input port from unknown strong signals.
2. Datasheet extract (recorded values)
| Parameter | Value |
|---|---|
| Rated power | 2 Watt (+33dBm) |
| Attenuation | 10 dB |
| Connector Type | SMA male – female |
| Frequency Range | DC - 6.0 GHz |
| Impedance (Nominal) | 50Ω |
| Part list | 6GHz 2W SMA Attenuator - 10dB 1 |
| Tolerance | +/- 0.5dB/max |
| V.S.W.R (MAX) | 1.22 : 1 |
Integration
Points to check before using 320160016 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
Power and communication
| Rated power | 2 Watt (+33dBm) |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
- Power : plan for a supply compatible with 2 Watt (+33dBm).
Compliance, lifecycle and traceability
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
Lifecycle and product statusStatus not stated
- In production
- Not recommended for new designs
- End of life
- Obsolete
| Current status | Status not stated |
| Key dates | Not recorded |
Manufacturer references
| Manufacturer part number | 320160016 |
| Manufacturer | Seeed Studio |