E23010426
Home Assistant home automation controller kit with CM5/CM4 module, SSD and…

- RAM
- Up to 8 GB
- Storage
- Up to 32 GB eMMC
- Ethernet
- Gigabit Ethernet
- Audio
- High-quality stereo audio DAC
Home Assistant home automation controller kit with CM5/CM4 module, SSD and…
Maker, Prototyping, Open-Hardware & Developer Boards
Seeed Studio Home Assistant Yellow kit, a home automation controller board with selectable Raspberry Pi CM4 or CM5 module, an M.2 NVMe slot and an integrated Zigbee 3.0 radio.
Overview. The Seeed Studio Home Assistant Yellow is a home automation controller kit, a developer board designed to run the Home Assistant platform. The kit includes the Home Assistant Yellow board, a translucent injection-molded polycarbonate enclosure and a custom heat sink.
Main characteristics. The processor is a quad-core Cortex-A72 (ARMv8) 64-bit at 1.5 GHz, with up to 8 GB of RAM and up to 32 GB of eMMC storage. The real-time clock is backed by a CR2032 battery. The enclosure measures 123 mm x 123 mm x 36 mm and is assembled without tools.
Interfaces and connectivity. The board provides Gigabit Ethernet, two USB 2.0 Type-A host ports and one USB-C 2.0 device port. The Silicon Labs MGM210P Mighty Gecko module provides 2.4 GHz Zigbee 3.0 communication with transmit power up to +20 dBm, the Zigbee 3.0 (EZSP) firmware being pre-installed and upgradable. Thread is listed as a supported protocol but must be enabled manually by following the manufacturer's guide. An M.2 socket for NVMe SSDs (2230, 2242, 2260 and 2280 sizes) is provided, with a PCIe x1 interface.
Power and environment. The board is powered at 12 V / 2 A through a barrel DC power jack, and a PoE version is supported. Typical power consumption is about 1.5 W at idle, about 2.5 W at idle with NVMe, and about 5 to 9 W under load.
User interface. Three LEDs indicate power (green), disk usage (red) and Home Assistant system state (yellow). A red button performs a factory reset.
Typical uses. The kit suits centralised home automation, controlling Zigbee-compatible devices such as lights, thermostats and multimedia equipment, and tracking energy consumption with compatible sensing hardware. A high-quality stereo audio DAC is also included.
Integration. The Raspberry Pi CM4 or CM5 Compute Module is selectable, and the module ships without a pre-installed operating system. Adding Thread alongside Zigbee requires an additional radio.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for E23010426, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Audio | High-quality stereo audio DAC |
| Board Size | 12 cm x 12 cm |
| Buttons | Red (Factory reset),; Blue (To be determined) |
| Enclosure | Translucent injection-molded polycarbonate plastic; Tool-free assembly; Accommodates custom heat sink (included) |
| Enclosure Size | 123 mm x 123 mm x 36 mm |
| Ethernet | Gigabit Ethernet |
| Expansion Slot | M.2 socket for NVMe SSDs (2230, 2242, 2260, 2280) |
| LEDs | Green (Power), Red (Disk usage), Yellow (Home Assistant system state) |
| Part list | Home Assistant Yellow Board x1; Accommodates custom heat sink x1; Translucent injection-molded polycarbonate plastic x1 |
| PCIe | PCIe x1 |
| PoE Supported | PoE version supported |
| Power | 12 V / 2 A through barrel DC power jack |
| Pre-installed Firmware | Zigbee 3.0 (EZSP), can be upgraded |
| Processor | Quad-core Cortex-A72 (ARMv8) 64-bit / 1.5 GHz |
| RAM | Up to 8 GB |
| RTC | Backed by CR2032 battery |
| Storage | Up to 32 GB eMMC |
| Typical Power Usage | Idle ~1.5 W,; Idle with NVMe ~2.5 W,; Load ~5-9 W |
| USB Ports | 2 x USB 2.0 Type-A host port,; 1 x USB-C 2.0 device port |
| Wireless | Silicon Labs MGM210P Mighty Gecko Module |
| Wireless Protocols | Zigbee 3.0, Thread(Follow this guide to enable Thread ) |
| Wireless Radio | 2.4 GHz with TX power up to +20 dBm |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for E23010426. For a missing document or a specific revision, our experts send it to you.
Seeed Studio Home Assistant Yellow kit, a home automation controller board with selectable Raspberry Pi CM4 or CM5 module, an M.2 NVMe slot and an integrated Zigbee 3.0 radio.
| Parameter | Value |
|---|---|
| Audio | High-quality stereo audio DAC |
| Board Size | 12 cm x 12 cm |
| Buttons | Red (Factory reset),; Blue (To be determined) |
| Enclosure | Translucent injection-molded polycarbonate plastic; Tool-free assembly; Accommodates custom heat sink (included) |
| Enclosure Size | 123 mm x 123 mm x 36 mm |
| Ethernet | Gigabit Ethernet |
| Expansion Slot | M.2 socket for NVMe SSDs (2230, 2242, 2260, 2280) |
| LEDs | Green (Power), Red (Disk usage), Yellow (Home Assistant system state) |
| Part list | Home Assistant Yellow Board x1; Accommodates custom heat sink x1; Translucent injection-molded polycarbonate plastic x1 |
| PCIe | PCIe x1 |
| PoE Supported | PoE version supported |
| Power | 12 V / 2 A through barrel DC power jack |
| Pre-installed Firmware | Zigbee 3.0 (EZSP), can be upgraded |
| Processor | Quad-core Cortex-A72 (ARMv8) 64-bit / 1.5 GHz |
| RAM | Up to 8 GB |
| RTC | Backed by CR2032 battery |
| Storage | Up to 32 GB eMMC |
| Typical Power Usage | Idle ~1.5 W,; Idle with NVMe ~2.5 W,; Load ~5-9 W |
| USB Ports | 2 x USB 2.0 Type-A host port,; 1 x USB-C 2.0 device port |
| Wireless | Silicon Labs MGM210P Mighty Gecko Module |
| Wireless Protocols | Zigbee 3.0, Thread(Follow this guide to enable Thread ) |
| Wireless Radio | 2.4 GHz with TX power up to +20 dBm |
Answers to the questions that the recorded characteristics of E23010426 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Pre-installed Firmware": Zigbee 3.0 (EZSP), can be upgraded.
Yes — recorded under "Ethernet": Gigabit Ethernet.
Yes — recorded under "USB Ports": 2 x USB 2.0 Type-A host port,; 1 x USB-C 2.0 device port.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Home Assistant home automation controller kit with CM5/CM4 module, SSD and…

NXP Industrial Raspberry Pi Alternative

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | E23010426 |
| Manufacturer | Seeed Studio |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details