OPENMV4
ARM Cortex-M7 480 MHz MicroPython machine vision camera

- Storage
- -40°C to 125°C
- Active - No μSD Card
- 160mA @ 3.3V
- Active - μSD Card
- 170mA @ 3.3V
- Height
- 30mm
ARM Cortex-M7 480 MHz MicroPython machine vision camera
Compact machine vision camera board with an ARM Cortex-M7 480 MHz microcontroller, programmable in MicroPython, for embedded vision applications.
Overview. The OPENMV4 (OpenMV Cam H7) from Seeed Studio is a machine vision camera, a small, low-power ARM Cortex-M7 microcontroller board that lets you implement embedded machine vision applications.
Main characteristics. The 32-bit ARM Cortex-M7 CPU with double precision FPU runs at 480 MHz (1027 DMIPS). Memory comprises 1 MB of RAM and 2 MB of flash, including a 128 KB bootloader and 1792 KB firmware. The removable camera module uses an OV7725 image sensor capable of 640x480 grayscale and 320x240 RGB565 images above that resolution, with a 2.8 mm lens, F2.0 aperture, 1/3" format and M12*0.5 mount.
Interfaces and connectivity. The full-speed USB (12 Mbit/s) interface appears as a virtual COM port and as a USB flash drive. A micro-SD card socket, an SPI bus, an I2C bus, a CAN bus and an asynchronous serial TX/RX link allow exchanges with other microcontrollers and sensors. The board provides a 12-bit ADC, a 12-bit DAC and three servo control pins. All I/O pins support interrupts and PWM, and are 5 V tolerant with 3.3 V output.
Power and environment. The VIN input voltage ranges from 3.6 V to 5 V. Consumption is 110 mA at 3.3 V idle and 160 mA at 3.3 V active without a micro-SD card. The operating range is -20 °C to 70 °C and the storage range is -40 °C to 125 °C. Dimensions are 36 x 45 x 30 mm for 19 g.
Typical uses. Programmed in MicroPython, the board can trigger picture or video capture on external events and run vision algorithms to control its I/O pins, for example frame differencing.
Integration. The CAN bus, I2C bus and serial link allow the camera to be connected to existing sensors, PLCs and microcontrollers.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for OPENMV4, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Active - No μSD Card | 160mA @ 3.3V |
| Active - μSD Card | 170mA @ 3.3V |
| Electrical Info | All pins are 5V tolerant with 3.3V output. All pins can sink or source up to 25mA. P6 is not 5V tolerant in ADC or DAC mode. Up to 120mA may be sunk or sourced in total between all pins. VIN may be between 3.6V and 5V. Do not draw more than 250mA from your OpenMV Cam's 3.3V rail. |
| Flash Layout | 128KB Bootloader; 128KB Embedded Flash Drive; 1792KB Firmware; (2MB Total) |
| Height | 30mm |
| Idle - No μSD Card | 110mA @ 3.3V |
| Idle - μSD Card | 110mA @ 3.3V |
| Length | 45mm |
| Lens Info | Focal Length: 2.8mm; Aperture: F2.0; Format: 1/3"; HFOV = 70.8°, VFOV = 55.6°; Mount: M12*0.5; IR Cut Filter: 650nm (removable) |
| Maximum Supported Resolutions | Grayscale: 640x480 and under; RGB565: 320x240 and under; Grayscale JPEG: 640x480 and under; RGB565 JPEG: 640x480 and under |
| Operating | -20°C to 70°C |
| Processor | ARM® 32-bit Cortex®-M7 CPU; w/ Double Precision FPU; 480 MHz (1027 DMIPS); Core-Mark Score: 2400; (compare w/ Raspberry Pi 2: 2340) |
| RAM Layout | 256KB.DATA/.BSS/Heap/Stack; 512KB Frame Buffer/Stack; 256 KB DMA Buffers; (1MB Total) |
| Storage | -40°C to 125°C |
| Supported Image Formats | Grayscale; RGB565; JPEG (and BAYER) |
| Weight | 19g |
| Width | 36mm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for OPENMV4. For a missing document or a specific revision, our experts send it to you.
Compact machine vision camera board with an ARM Cortex-M7 480 MHz microcontroller, programmable in MicroPython, for embedded vision applications.
| Parameter | Value |
|---|---|
| Active - No μSD Card | 160mA @ 3.3V |
| Active - μSD Card | 170mA @ 3.3V |
| Electrical Info | All pins are 5V tolerant with 3.3V output. All pins can sink or source up to 25mA. P6 is not 5V tolerant in ADC or DAC mode. Up to 120mA may be sunk or sourced in total between all pins. VIN may be between 3.6V and 5V. Do not draw more than 250mA from your OpenMV Cam's 3.3V rail. |
| Flash Layout | 128KB Bootloader; 128KB Embedded Flash Drive; 1792KB Firmware; (2MB Total) |
| Height | 30mm |
| Idle - No μSD Card | 110mA @ 3.3V |
| Idle - μSD Card | 110mA @ 3.3V |
| Length | 45mm |
| Lens Info | Focal Length: 2.8mm; Aperture: F2.0; Format: 1/3"; HFOV = 70.8°, VFOV = 55.6°; Mount: M12*0.5; IR Cut Filter: 650nm (removable) |
| Maximum Supported Resolutions | Grayscale: 640x480 and under; RGB565: 320x240 and under; Grayscale JPEG: 640x480 and under; RGB565 JPEG: 640x480 and under |
| Operating | -20°C to 70°C |
| Processor | ARM® 32-bit Cortex®-M7 CPU; w/ Double Precision FPU; 480 MHz (1027 DMIPS); Core-Mark Score: 2400; (compare w/ Raspberry Pi 2: 2340) |
| RAM Layout | 256KB.DATA/.BSS/Heap/Stack; 512KB Frame Buffer/Stack; 256 KB DMA Buffers; (1MB Total) |
| Storage | -40°C to 125°C |
| Supported Image Formats | Grayscale; RGB565; JPEG (and BAYER) |
| Weight | 19g |
| Width | 36mm |
Answers to the questions that the recorded characteristics of OPENMV4 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Electrical Info": All pins are 5V tolerant with 3.3V output. All pins can sink or source up to 25mA. P6 is not 5V tolerant in ADC or DAC mode. Up to 120mA may be sunk or sourced in total between all pins. VIN may be between 3.6V and 5V. Do not draw more than 250mA from your OpenMV Cam's 3.3V rail..
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
ARM Cortex-M7 480 MHz MicroPython machine vision camera

OpenMV Cam H7

OpenMV Cam H7 Plus

Mini Class Medical ISP Module – USB Module is Cost-Effective and Compact for Endoscopes and Catheters

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | OPENMV4 |
| Manufacturer | Seeed Studio |
Vision Controllers
Compact Image Signal Processor for Automotive Cameras · Ref. : OV491
Price on request
Vision Controllers
STM32H743 MicroPython machine vision controller with 5 MP sensor · Ref. : 102991354
Price on request
Vision Controllers
Python-programmable machine vision camera, 480 MHz Cortex-M7 · Ref. : 102991322
Price on request
Vision Controllers
Image signal processor companion chip for automotive imaging · Ref. : OV495
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details