Transportation & Fleet
Connectivity and computing on vehicles and along infrastructure
To check
- Supply-voltage range and transient immunity for vehicle power
- Antenna placement and multi-band coverage
- Shock and vibration ratings
Dual-band 2.4G/5G Wi-Fi and Bluetooth BLE 5.0 combo module
OEM Cellular Modules (M.2 / mPCIe)
The Seeed Studio RTL8720DN is an SMD module combining dual-band 2.4 GHz and 5 GHz Wi-Fi with Bluetooth 5.0 BLE, intended for embedded wireless applications.
Seeed Studio RTL8720DN is a combined Wi-Fi and Bluetooth module in a 24 x 16 x 3 mm SMD-16 package, based on the Realtek RTL8720DN chip. It integrates Wi-Fi and Bluetooth in a single chip, with a choice of PCB antenna or IPEX antenna connector.
Wi-Fi low power mode is supported.
Interfaces. The module provides one ADC interface, two UART ports at standard baud rates, one I2C and one SPI interface shared with the PWM outputs, four PWM outputs and an SWD interface. All of these interfaces can also be used as GPIO.
Power and environment. The supply voltage ranges from 3.0 V to 3.6 V, with a typical value of 3.3 V and a current above 450 mA. The operating temperature range is -20 °C to 70 °C, and the storage range is -40 °C to 125 °C at humidity below 90% RH. The module is certified RoHS, FCC, CE and SRRC.
Typical uses. This module suits BLE beacons, Bluetooth gateways, industrial wireless control equipment, wearable electronic devices, secure ID tags and smart home systems, in applications where 5 GHz Wi-Fi is required alongside Bluetooth. Available on quotation from Atlas Electronics.
Derived from the part category, not a compatibility statement.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for RTL8720DN, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Antenna | PCB or IPEX antenna |
| Bluetooth | BT5.0 |
| Bluetooth Frequency Range | 2.402GHz - 2.480GHz |
| Certification | RoHS、FCC、CE、SRRC |
| Frequency Range | 2400-2483.5MHz or 5180-5825MHz |
| Interface | UART/GPIO/ADC/PWM/IIC/SPI/SWD |
| Operating Temperature | -20 ℃ ~ 70 ℃ |
| Package | SMD-16 |
| Power supply | Voltage 3.0V ~ 3.6V,Typ:3.3V,current >450mA |
| Size | 24*16*3(±0.2)MM |
| Storage Environment | -40 ℃ ~ 125 ℃ , < 90%RH |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for RTL8720DN. For a missing document or a specific revision, our experts send it to you.
The Seeed Studio RTL8720DN is an SMD module combining dual-band 2.4 GHz and 5 GHz Wi-Fi with Bluetooth 5.0 BLE, intended for embedded wireless applications.
| Parameter | Value |
|---|---|
| Antenna | PCB or IPEX antenna |
| Bluetooth | BT5.0 |
| Bluetooth Frequency Range | 2.402GHz - 2.480GHz |
| Certification | RoHS、FCC、CE、SRRC |
| Frequency Range | 2400-2483.5MHz or 5180-5825MHz |
| Interface | UART/GPIO/ADC/PWM/IIC/SPI/SWD |
| Operating Temperature | -20 ℃ ~ 70 ℃ |
| Package | SMD-16 |
| Power supply | Voltage 3.0V ~ 3.6V,Typ:3.3V,current >450mA |
| Size | 24*16*3(±0.2)MM |
| Storage Environment | -40 ℃ ~ 125 ℃ , < 90%RH |
Points to check before using RTL8720DN in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power supply | Voltage 3.0V ~ 3.6V,Typ:3.3V,current >450mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Architectures in which RTL8720DN can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Connectivity and computing on vehicles and along infrastructure
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
Send a request for RTL8720DN and the other parts of your project.
Answers to the questions that the recorded characteristics of RTL8720DN can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Interface": UART/GPIO/ADC/PWM/IIC/SPI/SWD.
Yes — recorded under "Bluetooth": BT5.0.
-20 ℃ ~ 70 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Dual-band 2.4G/5G Wi-Fi and Bluetooth BLE 5.0 combo module

Realtek RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0 Combo Module

M.2 LTE Module X2-Series Expansion Board

GPS Antenna Kit for reTerminal DM-4G Module — GPS Antenna Kit for reTerminal DM - Seeed Studio

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | RTL8720DN |
| Manufacturer | Seeed Studio |
OEM Cellular Modules (M.2 / mPCIe)
LTE Cat 1 embedded cellular module for AT&T · Ref. : MTQ-LAT3-B01.R2A
Price on request
OEM Cellular Modules (M.2 / mPCIe)
Industrial 5G router with dual SIM and dual cellular module
Price on request
OEM Cellular Modules (M.2 / mPCIe)
4G LTE Android 4K TV box · Ref. : APC329L
Price on request
OEM Cellular Modules (M.2 / mPCIe)
Multi-band LTE Cat M1 and NB1 mPCIe cellular module with GNSS · Ref. : 510007
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details