SSD202 – 7-Inch Smart Display with ARM Cortex-A7 Processor

7-Inch Smart Display with ARM Cortex-A7 Processor

Digital Signage Players

  • -10~70℃
  • 4 x GPIO
  • -20~85℃
  • 122mm x 73mm
Manufacturer part number
SSD202
Manufacturer
Seeed Studio
Operating Temperature
-10~70℃
Extension Interface
4 x GPIO

7-inch smart display from Seeed Studio based on the SigmaStar SSD202 SoC, for embedded displays with Full HD video decoding and network and serial connectivity.

Product overview

Seeed Studio SSD202. the Seeed Studio 7-inch smart display, based on the SigmaStar SSD202 SoC, is a system-on-module design paired by default with a 1024 x 600 IPS RGB module.

Processor and memory. The SigmaStar SSD202 SoC integrates an ARM Cortex-A7 dual-core processor running up to 1.2GHz. Built-in 128MB DDR2/DDR3 memory supports auto-refresh and self-refresh modes, and the 256MB flash supports 1/2/4-bit SPI-NOR/SPI-NAND.

Video and display. The video processor includes an H.265/HEVC decoder and supports FHD (1920x1080) decoding at 60 fps. The video output is an RGB interface, with a 1024*600 IPS RGB module supplied by default.

Connectivity. The product provides a 1-channel 10/100Mbps Ethernet port in half duplex and full duplex, Wi-Fi with the SSW101B chip rated for 500m in open space, a USB 2.0 port, a Micro-SD card slot (SDIO2.0) and 4 GPIO. The serial interfaces comprise a DEBUG (PM_UART) port, one RS232 port and one RS485 port.

Audio and power. An audio output for left and right channel speakers is provided through a PH-4 connector. Default power is USB Type-C, with an optional 4.5 to 30V DC at 1A supply, rated voltage 12V DC. The real-time clock uses a 1220 button battery.

Environment and integration. The operating temperature range is -10 to 70 °C and the storage range is -20 to 85 °C. The product runs Linux, and its PCBA measures 122mm x 73mm. Typical uses include smart building indoor intercoms, smart home central control, elevator floor displays, IP network broadcasting devices and speech recognition equipment.

See all specifications

Highlights

  • Audio: 1 x left and right channel speaker (PH-4 connector)
  • Ethernet: 1-channel 10/100Mbps half duplex/full duplex Ethernet
  • Extension Interface: 4 x GPIO
  • Operating Temperature: -10~70℃
  • PCBA Dimensions: 122mm x 73mm
  • RTC: 1220 button battery, easy to maintain

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -10~70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Digital Signage Players
Request a quote