XB6-EC2002ST – EtherCAT Coupler with X-bus and 2 A Power Supply

EtherCAT Coupler with X-bus and 2 A Power Supply

IO-Link Masters

  • -10~60℃
  • -20~75℃
  • 106*61*47mm
  • 2*RJ45
Manufacturer part number
XB6-EC2002ST
Manufacturer
Solidot
Operating Temperature
-10~60℃
Rated current consumption
Max. 1600 mA (subsequent IO)

The Solidot XB6-EC2002ST EtherCAT coupler is a kit combining an EtherCAT coupler, a 2 A power supply and an end cover, used to connect I/O modules to an EtherCAT master.

Product overview

Overview. The Solidot XB6-EC2002ST is an EtherCAT coupler supplied as a kit, including the EtherCAT coupler XB6-EC0002, the 2 A power supply XB6-P2000H and the end cover XB6-CVR00. It measures 106 × 61 × 47 mm and weighs approximately 300 g.

Main characteristics. The XB6-P2000H power supply provides 2000 mA of drive current for the coupler and subsequent I/O modules. The backplane X-bus is high speed and supports up to 32 slave stations, with a scan cycle as low as 1 ms. Removable terminal blocks (RTB) simplify wiring.

Interfaces and connectivity. The coupler provides two RJ45 EtherCAT bus ports (in and out) and one backplane X-bus interface. Transmission runs at 100 Mb/s over Ethernet CAT5 cable, with a 100 m station-to-station distance. Electrical isolation is 500 V.

Power and environment. Power is supplied at 24 VDC (18 to 36 V) through a 3-pin spring-cage connector. The rated current consumption is at most 1600 mA for the subsequent I/O. The product has IP20 protection, operates between -10 and 60 ℃, stores between -20 and 75 ℃, and tolerates 95 % relative humidity without condensation.

Typical uses and integration. This coupler suits EtherCAT masters such as TwinCAT, Codesys and Omron, for integrating I/O modules into an EtherCAT architecture. It is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Dimensions: 106*61*47mm
  • Bus connection method: 2*RJ45
  • Bus Protocol: EtherCAT
  • Data transmission medium: Ethernet CAT5 Cable
  • Electrical isolation: 500V
  • Operating Temperature: -10~60℃

Good to know before integrating

  • Thermal: rated operating range -10~60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All IO-Link Masters
Request a quote