XB6-MT2002ST – Modbus TCP coupler kit with 2 A power supply and X-bus

Modbus TCP coupler kit with 2 A power supply and X-bus

Serial and Communication Modules

  • -10~60℃
  • -20~75℃
  • 106*61*47mm
  • Modbus TCP
Manufacturer part number
XB6-MT2002ST
Manufacturer
Solidot
Operating Temperature
-10~60℃
Storage Temperature
-20~75℃

Solidot XB6-MT2002ST Modbus TCP coupler kit, with 2 A power supply and X-bus backplane, for connecting I/O modules to a Modbus TCP master over Ethernet.

Product overview

Overview. The Solidot XB6-MT2002ST is a Modbus TCP coupler kit for connecting input/output modules to a Modbus TCP master. It includes the Modbus TCP coupler XB6-MT0002, a 2 A power supply XB6-P2000H and an end cover XB6-CVR00.

Main characteristics. Compact footprint of 106 x 61 x 47 mm for a weight of approximately 300 g. The kit supplies a 2000 mA drive circuit for the coupler and subsequent I/O modules. The X-bus backplane has a maximum scan cycle of 1 ms and supports up to 32 slaves. The coupler offers simple configuration with a web-based configuration function and supports function codes 01/02/03/04/05/15/16/23.

Interfaces and connectivity. Two Modbus TCP bus interfaces, IN and OUT, and one X-bus backplane interface. Transmission runs over Ethernet CAT5 cable at 100 Mb/s, with a maximum station-to-station distance of 100 m. Pluggable terminal blocks and spring-cage connections simplify wiring. The coupler is compatible with most Modbus TCP masters, including those from Schneider, Siemens and Keyence.

Power and environment. 24 VDC power supply (18 to 36 V) through a 3-pin spring-cage connector. Electrical isolation of 500 V. Operating temperature from -10 to 60 ℃, storage temperature from -20 to 75 ℃, relative humidity 95 % without condensation. Protection rating IP20.

Typical uses. Integration of remote I/O modules into an existing Modbus TCP architecture with a Schneider, Siemens or Keyence master.

See all specifications

Highlights

  • Dimensions: 106*61*47mm
  • Bus Protocol: Modbus TCP
  • Data transmission medium: Ethernet CAT5 Cable
  • Electrical isolation: 500V
  • Operating Temperature: -10~60℃
  • Power Connection Method: 3-pin spring-cage connector

Good to know before integrating

  • Thermal: rated operating range -10~60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote