XB6S-CB2002A – CC-Link IE Field Basic bus coupler with integrated Ethernet switch

CC-Link IE Field Basic bus coupler with integrated Ethernet switch

Industrial Ethernet Switches, PoE & TSN Networking

  • -20℃~+60℃
  • -40℃~+80℃
  • 106.4*43*61mm
  • Supported
Manufacturer part number
XB6S-CB2002A
Manufacturer
Solidot
Operating Temperature
-20℃~+60℃
Storage Temperature
-40℃~+80℃

The Solidot XB6S-CB2002A is an industrial CC-Link IE Field Basic bus coupler with Ethernet switch, driving up to 32 I/O modules over an X-bus with a 1 ms scan cycle.

Product overview

Overview. The Solidot XB6S-CB2002A is a CC-Link IE Field Basic bus coupler, an industrial Ethernet switch with two Ethernet fieldbus interfaces and one backplane X-bus interface. It drives the I/O modules connected to it and needs only one node on the network.

Main characteristics. The coupler handles up to 32 slaves and 1024 bytes of input and output process data, with a minimum cycle time of 1 ms and a transmission rate of 100 Mb/s. The transmission distance reaches 100 m between stations over Ethernet CAT5 cable.

Interfaces and connectivity. Two RJ45 connectors provide the network connection, and firmware upgrade, diagnostics and automatic module fault recovery are supported.

Power and environment. Power is supplied at 24 VDC (18 to 36 V) through a 3-pin spring-cage connector. The operating temperature range is -20 ℃ to +60 ℃, the storage temperature -40 ℃ to +80 ℃, the relative humidity 95 % non-condensing, and the protection rating IP20. The housing measures 106.4 x 43 x 61 mm and weighs 160 g.

Typical uses. This coupler suits PLC and remote I/O architectures where a small number of network nodes must drive digital, analog or motion control modules.

Integration. The manufacturer states compatibility with Mitsubishi FX5U, L and iQ-R PLCs and with mainstream CC-Link IE Field Basic masters.

See all specifications

Highlights

  • Dimensions: 106.4*43*61mm
  • Alarm: Supported
  • Bus connection method: 2*RJ45
  • Bus Protocol: CC-Link IE Field Basic
  • Data transmission medium: Ethernet CAT5 Cable
  • Diagnostics: Supported

Good to know before integrating

  • Thermal: rated operating range -20℃~+60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote