Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

XBF4-EC04 – EtherCAT fieldbus coupler for DIN-rail remote I/O modules

EtherCAT fieldbus coupler for DIN-rail remote I/O modules

Modular DIN-Rail Remote I/O Modules

  • EtherCAT
Manufacturer part number
XBF4-EC04
Manufacturer
Solidot

The XBF4-EC04 is a DIN-rail EtherCAT fieldbus coupler from Solidot's XBF4 series. It connects remote I/O modules to an EtherCAT master at 100 Mb/s.

Product overview

Solidot XBF4-EC04. The XBF4-EC04 is an EtherCAT fieldbus coupler for DIN-rail remote I/O modules, from Solidot's XBF4 series. It handles communication with the EtherCAT master and real-time data exchange with the I/O modules connected to it.

Main characteristics. The coupler offers a minimum cycle time of 250 µs, an input/output process data size of 1020 bytes and PDO access via SDO. It supports firmware upgrade and module fault auto-recovery. Its dimensions are 112.7 × 28 × 76 mm and its weight is 140 g.

Interfaces and connectivity. The coupler has a 2×RJ45 fieldbus interface and a 4×RJ45 expansion module interface, allowing daisy-chain connection of different types of I/O modules. Transmission uses Ethernet/EtherCAT over CAT5 S/FTP cable at 100 Mb/s. The transmission distance is at most 50 m from the coupler interface to the last I/O module on the branch, and a single interface can extend up to 16 modules. Each interface supplies at most 500 mA, and at most 750 mA across the four interfaces.

Power and environment. The coupler is powered from SELV 24 VDC (18 V to 36 V), with an input current below 0.95 A. It includes reverse polarity protection, short-circuit protection and surge protection. Its operating temperature is -20 °C to +60 °C, storage temperature is -40 °C to +80 °C, relative humidity is 95 % non-condensing, and its protection rating is IP20.

Typical uses and integration. The XBF4-EC04 is intended for use with XBF couplers to extend the inputs and outputs of an EtherCAT master or controller, with a design optimised for Beckhoff, Omron and Keyence systems. It occupies fewer nodes on the bus, with up to 32 slots and 1024 points per coupler. Indicator lights give at-a-glance module status for inspection and maintenance. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote