XBF4-EC04A – EtherCAT coupler for DIN-rail remote I/O modules

EtherCAT coupler for DIN-rail remote I/O modules

Modular DIN-Rail Remote I/O Modules

  • -20℃~+60℃
  • 4×RJ45
  • 2×RJ45
  • 20VDC~24VDC
Manufacturer part number
XBF4-EC04A
Manufacturer
Solidot
Operating Temperature
-20℃~+60℃
Expansion Module Interface
4×RJ45

Solidot XBF4-EC04A EtherCAT fieldbus coupler for DIN-rail remote I/O modules, connecting expansion modules through four RJ45 interfaces.

Product overview

Overview. The Solidot XBF4-EC04A is an EtherCAT fieldbus coupler from the XBF4 series, designed to receive DIN-rail remote I/O modules. It handles communication with the EtherCAT master and connects the expansion modules to the real-time system.

Main characteristics. The coupler supports up to 32 slots and 1024 points, with a minimum cycle time of 250 µs and a transmission rate of 100 Mb/s. The input/output process data size reaches 1020 bytes. The module provides disconnection detection, module fault auto-recovery, PDO access via SDO and firmware upgrade support.

Interfaces and connectivity. The coupler has two RJ45 fieldbus interfaces and four RJ45 expansion interfaces allowing daisy-chain connection of various types of I/O modules. Links use an Ethernet/EtherCAT CAT5 S/FTP cable. The maximum transmission distance is 50 m from the coupler interface to the last module on the branch, one interface can extend up to 16 modules, and the maximum distance between discrete I/O modules is 30 m.

Power and environment. The module is powered from 24 VDC SELV (18 V to 36 V) with an input current below 0.95 A. The supply current is limited to 500 mA per interface and 750 mA across the four interfaces. It includes reverse polarity, short-circuit and surge protection. It operates between -20 °C and +60 °C, stores between -40 °C and +80 °C, tolerates 95 % relative humidity non-condensing and has an IP20 protection rating. Dimensions 112.7 × 28 × 76 mm, weight 140 g.

Use and integration. This coupler suits a remote I/O station driven by an EtherCAT master, with simplified field wiring and indicator lights that ease diagnosis and maintenance.

See all specifications

Highlights

  • Dimensions: 112.7×28×76mm
  • Supply voltage: 20VDC~24VDC
  • Bus Protocol: EtherCAT
  • Data transmission medium: Ethernet/EtherCAT CAT5 S/FTP cable
  • Data transmission medium of the Coupler expansion interface: Ethernet/EtherCAT CAT5 S/FTP cable
  • Disconnection Detection: Supported

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 20VDC~24VDC.
  • Thermal: rated operating range -20℃~+60℃ — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote