MD0020
Pyroelectric infrared human presence sensor module (3 pack)

- Operating Voltage Range
- DC 4.5-20V
- Quiescent Current
- <50uA
- Board Dimensions
- 32mm*24mm
- Angle Sensor
- <100 ° cone angle
Pyroelectric infrared human presence sensor module (3 pack)
Educational STEM Coding & Sensor Starter Packs
HC-SR501 pyroelectric infrared human presence sensor module in a 3 pack, designed for motion detection in STEM projects and electronics learning applications.
Overview. The SunFounder MD0020 is an HC-SR501 pyroelectric infrared (PIR) human presence sensor module, supplied as a 3 pack within STEM starter kits for coding and sensor projects.
Main characteristics. The module has a detection cone angle below 100 °, a 23 mm diameter lens by default and board dimensions of 32 mm × 24 mm. Its quiescent current is below 50 µA.
Power and output. The operating voltage range is DC 4.5 to 20 V. The level output is 3.3 V high and 0 V low.
Timing adjustments. The output delay is adjustable from 5 to 200 seconds. The block time is 2.5 seconds by default and can be set over a range from a fraction of a second to tens of seconds.
Trigger mode. The module offers repeatable trigger on high level, the default setting, or non-repeatable trigger on low level.
Operating conditions. The operating temperature range is -15 to +70 °C.
Typical uses. This module suits presence detection in educational and prototyping setups connected to a control board.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for MD0020, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Angle Sensor | <100 ° cone angle |
| Block time | 2.5S(default)Can be made a range(0.xx to tens of seconds) |
| Board Dimensions | 32mm*24mm |
| Delay Time | 5-200S(adjustable) the range is (0.xx second to tens of second) |
| Lens size sensor | Diameter:23mm(Default) |
| Level output | High 3.3 V /Low 0V |
| Operating Voltage Range | DC 4.5-20V |
| Operation Temp | -15-+70 degrees |
| Product Type | HC--SR501 Body Sensor Module |
| Quiescent Current | <50uA |
| Trigger | L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for MD0020. For a missing document or a specific revision, our experts send it to you.
HC-SR501 pyroelectric infrared human presence sensor module in a 3 pack, designed for motion detection in STEM projects and electronics learning applications.
| Parameter | Value |
|---|---|
| Angle Sensor | <100 ° cone angle |
| Block time | 2.5S(default)Can be made a range(0.xx to tens of seconds) |
| Board Dimensions | 32mm*24mm |
| Delay Time | 5-200S(adjustable) the range is (0.xx second to tens of second) |
| Lens size sensor | Diameter:23mm(Default) |
| Level output | High 3.3 V /Low 0V |
| Operating Voltage Range | DC 4.5-20V |
| Operation Temp | -15-+70 degrees |
| Product Type | HC--SR501 Body Sensor Module |
| Quiescent Current | <50uA |
| Trigger | L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) |
Answers to the questions that the recorded characteristics of MD0020 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Block time": 2.5S(default)Can be made a range(0.xx to tens of seconds).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Pyroelectric infrared human presence sensor module (3 pack)

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | MD0020 |
| Manufacturer | SunFounder |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details