Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MAX7219 – 8x8 LED Dot Matrix Module with MAX7219 Driver, 4-Pack

8x8 LED Dot Matrix Module with MAX7219 Driver, 4-Pack

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
ST0286
Manufacturer
SunFounder

8x8 LED dot matrix module built around the MAX7219 driver, powered at 5 V and driven by three I/O pins. It cascades to drive several modules.

Product overview

Overview. The SunFounder ST0286 is an 8x8 common-cathode LED dot matrix module, supplied as a 4-pack of MAX7219 modules with 5-pin DuPont cables. It is intended for learning kits and prototypes.

Main characteristics. The module operates at 5 V and measures 5 cm x 3.2 cm x 1.5 cm. A single board drives one common-cathode 8x8 matrix, and the four 3 mm mounting holes accept M3 standoffs.

Control and connectivity. The MAX7219 is a four-wire serial driver that requires only three microcontroller I/O pins to drive the display. It includes a register to set the LED segment current, a 150 µA low-power shutdown mode, analog and digital brightness control, and an all-LEDs-on test mode. Each module has an input and an output, allowing several modules to be cascaded on one bus.

Wiring. One input connects to the microcontroller, and the output of the first module feeds the input of the next. Example with a 51 MCU: VCC to 5 V, GND to GND, DIN to P22, CS to P21, CLK to P20.

Typical uses. Displaying digits, bar graphs or characters on Arduino and microcontroller prototypes, and building multi-module panels.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote