Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

TS0231 – Motor driver shield for DC, stepper and servo motors on Uno

Motor driver shield for DC, stepper and servo motors on Uno

Educational STEM Coding & Sensor Starter Packs

Manufacturer part number
TS0231
Manufacturer
SunFounder

SunFounder TS0231 shield that plugs onto an Uno board to drive DC motors, stepper motors and servos, typically for robots and smart cars.

Product overview

SunFounder TS0231 Motor Driver Shield for Uno — this shield plugs onto an Uno board (Arduino, SunFounder or compatible) to drive DC motors, stepper motors and servos.

Overview. The shield has no functions of its own: it must be plugged onto an Uno board to operate. It is supplied as one unit and should be powered by an external supply to protect the shield.

Main characteristics. It integrates the L293D, which contains a bipolar H-bridge circuit and can drive two DC motors at the same time. Control uses the EN12, IN1 and IN2 signals: speed is adjusted by PWM on EN12, and rotation direction by IN1 and IN2, with a 74HC14 inverter providing forward and reverse control. The shield includes a power switch button.

Actuator drive. The shield uses the L293D for two DC motors, the ULN2003 for one stepper motor, and a 5 V supply for four servos.

Interfaces and connectivity. I/O ports from the Uno board are brought out for use by external circuits.

Power and environment. Working voltage 6.5 to 12 V DC, operating temperature 0 to 70 °C, minimum operating temperature 0 °C or higher.

Typical uses. Driving motors for robots and smart cars, in STEM education and prototyping.

Integration. The shield connects directly to an Uno board; the control signals and PWM are managed by the code running on the board.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote