TS0308D – 1-Channel 5 V Relay Module, High-Level Trigger

1-Channel 5 V Relay Module, High-Level Trigger

Relay Output Modules

  • 190mA
  • 5mA
  • Common pin
  • Connect to GND
Manufacturer part number
TS0308D+CABLE
Manufacturer
SunFounder
Max Current
190mA
Trigger Current
5mA

SunFounder TS0308D 1-channel relay module with a 5 V relay, used to switch a load from a control board such as Raspberry Pi, Arduino or a microcontroller.

Product overview

SunFounder TS0308D, 1-channel relay module — The SunFounder TS0308D is a single-channel relay module with an integrated 5 V relay, for switching a load from a logic-level signal. Main characteristics — The module triggers on a high level of 2.5 to 5 V on the SIG input, with a trigger current of 5 mA and a maximum current of 190 mA. It provides NO, COM and NC terminals for the output contact. Connectivity and power — The input connects to VCC (5 V, 3.3 V also available) and GND through an anti-reverse connector, with the corresponding cable supplied. A power indicator and an output indicator, lit at high level, support commissioning and diagnosis. Switchable loads — The contact handles a rated load of AC 125 to 250 V / 10 A or DC 28 to 30 V / 10 A, with a maximum switching voltage of 250 VAC or 30 V. Typical uses — The module is used with Raspberry Pi, Arduino, 8051, PIC, DSP, ARM, AVR, MSP430 platforms and TTL logic. Dimensions — 47 mm × 20 mm × 17 mm.

See all specifications

Highlights

  • COM: Common pin
  • GND: Connect to GND
  • Max Current: 190mA
  • Max. switch voltage: 250VAC, 30V
  • NC: Normally closed
  • NO: Normally open

Typical applications

Derived from the part category, not a compatibility statement.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Relay Output Modules
Request a quote