Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SUP-DO7019 – Fluorescent dissolved oxygen sensor for liquids

Fluorescent dissolved oxygen sensor for liquids

Dissolved Oxygen Sensors

  • RS-485
  • Modbus
Manufacturer part number
00531
Manufacturer
Supmea

Fluorescent dissolved oxygen sensor and transmitter for continuous measurement of oxygen in water, with Modbus RS-485 digital output.

Product overview

Overview. The SUP-DO7019 from Supmea is a dissolved oxygen transmitter designed to measure the oxygen concentration in water. It uses fluorescence lifetime technology and requires no oxygen consumption, no electrolyte and no membrane.

Measurement characteristics. Measuring range of 0-20 mg/L or 0-200% saturation, accuracy of ±3%FS and response time of 60 seconds. Automatic temperature compensation relies on a built-in NTC temperature sensor with an accuracy of ±0.5°C.

Interfaces and connectivity. Modbus RS-485 output, allowing networking without an intermediate controller. Cable lengths available: 5 m, 10 m, 15 m and 30 m.

Power and environment. Power supply 6-12 VDC, current below 50 mA. Ingress protection IP68, operating temperature 0 to 50°C and maximum pressure 3 bar.

Materials and installation. Sensor material SS316L, titanium alloy and POM, installation thread M22*1.5 mm, dimensions 22 mm × 188.3 mm. Calibration possible at 100% saturated oxygen (or air) and zero point calibration. Fluorescent cap life of one year under normal use.

Typical uses. Monitoring of dissolved oxygen in wastewater treatment, aquaculture and environmental monitoring, notably through a PLC or supervision system communicating over Modbus.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Dissolved Oxygen Sensors
Request a quote