Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SUP-1002S – Smart 4-20 mA HART signal isolator

Smart 4-20 mA HART signal isolator

General Industrial Sensors & Transmitters

Manufacturer part number
00540
Manufacturer
Supmea

SUP-1002S smart signal isolator from Supmea, which powers two-wire and three-wire transmitters and converts their current signals into standard signals for other instruments.

Product overview

Overview. The Supmea SUP-1002S smart signal isolator, model 1002S, provides isolated power to two-wire and three-wire transmitters and transmits their current signals after isolation, converting them into the signals required by other instruments.

Isolation. It provides three-way isolation between input, output and power supply, with a dielectric strength of 1500 VAC (1 min, no arcing phenomenon). This isolation improves immunity to interference in industrial process automatic control systems.

Inputs and outputs. Input signal (4~20) mA or (0~20) mA, current input impedance ≤100 Ω, maximum input current ≤30 mA. Outputs in (0~20) mA, (4~20) mA, (0~5) V, (1~5) V, (0~10) V or (2~10) V, with load resistance RL≤550 Ω for current outputs and RL≥1 MΩ for voltage outputs.

Communication. HART protocol supported.

Power. DC (20~35) V supply, distribution voltage ≥20 V@20 mA, power consumption ≤1.5 W for single output and ≤2.6 W for dual output.

Performance. Response time ≤2 ms, transmission accuracy 0.1%FS at 20 °C, temperature drift ≤50 ppm. Electromagnetic compatibility complies with GB/T18268 (IEC 61326-1).

Environmental conditions. Working temperature (-20~60) °C, storage temperature (-20~60) °C, relative humidity 25% to 85%.

Installation. 35 mm DIN rail mounting, weight 130 g.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote