Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

UM982C – Multi-constellation RTK GNSS module with dual-antenna heading

Multi-constellation RTK GNSS module with dual-antenna heading

GNSS Receiver Modules

  • GNSS
Manufacturer part number
UM982C
Manufacturer
Unicore

Unicore UM982C multi-constellation, multi-frequency GNSS receiver module for RTK positioning and dual-antenna heading, used as rover or base station in UAV and autonomous machine applications.

Product overview

UM982C GNSS module. The Unicore UM982C is a high-precision GNSS positioning and heading receiver module in a 48-pin LGA package, measuring 16.0 × 21.0 × 2.6 mm and weighing 1.82 ± 0.03 g. It is based on the NebulasIV GNSS SoC, which integrates RF, baseband and high-precision algorithms.

Performance. The module provides all-constellation, multi-frequency on-chip RTK positioning with an RTK horizontal accuracy of 0.8 cm + 1 ppm (RMS), a velocity accuracy of 0.03 m/s (RMS) and a time accuracy of 20 ns. Its dual-antenna heading has an accuracy of 0.1°/1 m baseline, with a data update rate of 20 Hz (RTK + heading). Initialization typically takes less than 5 s with a reliability above 99.9%, and the cold-start TTFF is below 30 s.

Signals and corrections. The module tracks GPS, BDS, Galileo, QZSS and GLONASS constellations and accepts differential data in RTCM V3.X format. It supports PPP-AR positioning with a horizontal accuracy of 3 cm in 5 min, as well as QZSS L6D (CLAS) PPP-RTK and the L-band TruePoint|REACH Sat PPP-AR service. It can operate as a rover or as a base station.

Interfaces and protocols. The module provides UART, IC*, SPI*, PPS, EVENT and CAN* interfaces, with data output in Unicore NMEA 0183 format. Interfaces marked * are supported only by specific firmware.

Environmental conditions. The module operates between -40 °C and +85 °C and stores between -55 °C and +95 °C, with a tolerated humidity of 95% without condensation. It complies with shock tests GJB150.18A-2009 and MIL-STD-810F, and vibration tests GJB150.16A-2009 and MIL-STD-810F.

Typical uses. The UM982C is used in UAV, precision agriculture and autonomous machine applications, including robotic lawn mowers where the module provides RTK positioning.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All GNSS Receiver Modules
Request a quote