USR-N668 – 8-port RS232/RS422/RS485 serial to Ethernet device server

8-port RS232/RS422/RS485 serial to Ethernet device server

Serial-to-Ethernet Device Servers (RS-232/422/485)

  • 1.6W
  • -40~105℃
  • RJ45、10/100Mbps
  • 300-115.2K(bps)
Manufacturer part number
RS232
Manufacturer
USR IoT
Hardware — Power Consumption
1.6W
Others — Storage Temp
-40~105℃

The USR-N668 serial device server connects eight RS232, RS422 or RS485 serial ports to an Ethernet network, using TCP and UDP modes. It mounts in a 1U rack.

Product overview

Overview. The USR-N668 serial device server from USR IoT is an eight-port serial to Ethernet converter that connects serial equipment to an IP network. It mounts in a 1U rack and measures 482 × 185 × 45 mm.

Main characteristics. Each serial port can be set independently to RS232, RS422 or RS485. The default mode is RS232, and switching to RS485 or RS422 is done with the dial code. Baud rate ranges from 300 to 115.2 kbps. The unit is built on an ARM9 platform with a hardware watchdog.

Interfaces and connectivity. The eight serial ports use RJ45 connectors. The server has two RJ45 Ethernet ports at 10/100 Mbps, with static IP or DHCP addressing and user-defined DNS. Supported network protocols are IP, TCP/UDP, ARP, ICMP, IPv4 and HTTPS.

Transmission modes. Transparent transmission is available in TCP Server, TCP Client, UDP Server, UDP Client and HTTPS Client modes. RFC2217 is supported, and VCOM drivers are provided. Serial and network caches are 10 Kbytes each, with data packing every 50 ms or 1472 bytes. The average transmission delay is greater than or equal to 50 ms.

Power and environment. The server operates from 85 to 265 V AC, 50/60 Hz, with a power consumption of 1.6 W. The operating temperature range is -40 to 85 °C, the storage range is -40 to 105 °C, and humidity is 5 to 95 % RH. The enclosure protection rating is IP30.

Reliability and compliance. The product is CE and RoHS certified. It meets EN61000-4-2 (electrostatic discharge, grade 4), EN61000-4-4 (electrical fast transients, grade 4) and EN61000-4-5 (surge, grade 3).

Typical uses. The server connects PLCs, measuring instruments or other serial-line equipment to an Ethernet network without changing their software. It can be configured by software, by web page or by AT commands.

See all specifications

Highlights

  • Hardware — Baud Rate: 300-115.2K(bps)
  • Hardware — Ethernet: RJ45、10/100Mbps
  • Hardware — Number of Serial Port: 8 Ports
  • Hardware — Power Consumption: 1.6W
  • Hardware — Serial Port Format: RJ45
  • Hardware — Work Voltage: AC 85~265 V,50/60Hz

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote