FT1
Frameless permanent magnet motor, flange mount, IP67

- FT1 Series Frameless Motor Catalog — Catalog — English — PDF — 2026-06-08
- 3.19MB
- Corporate
- Corporate products and information
- Excitation mode
- Permanent magnet
- Installation Method
- Flange
Frameless permanent magnet motor, flange mount, IP67
The Veichi FT1 is a flange-mounted frameless permanent magnet motor for direct drive in S1 continuous operation, with IP67 protection.
Veichi FT1 frameless motor. The FT1 is a frameless permanent magnet motor from the Veichi range, presented by the manufacturer as a direct drive solution. Main characteristics — It is offered in several frame sizes, with optional Hall sensors for standard feedback, and a flange installation method. Its work mode is S1 (continuous). Insulation and protection — The insulation class is F, the insulation voltage is AC1500V for 1 minute (220V), and the insulation resistance is greater than 10 MΩ at 48V DC. The protection level is IP67, except for the axis extension. The manufacturer indicates a maximum winding temperature of 155 ℃ and compliance with the low voltage directive 2006/95/EC. Environment — The permitted ambient temperature is -20 ℃ to 40 ℃ (no freezing), with derating above 40 ℃ according to the manufacturer's curve. Working humidity is 20% to 90% (no condensing). The motor must be installed indoors, at an altitude below 1000 m (derating above), away from corrosive or explosive gases and intense electric or magnetic fields. Rotation direction — By default the forward direction (FWD) is counterclockwise when viewed from the axis extension side. Typical uses — This motor suits precision applications such as collaborative robots, surgical robots, precision turntables and delta robots, where a compact size is required. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for FT1, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Ambient temperature | -20℃~40℃(no freezing); (Use according the derating curve above 40℃) |
| Corporate | Corporate products and information |
| Energy Storage Solution | Residential, C&I energy storage system solutions. |
| Excitation mode | Permanent magnet |
| Exhibitions | VEICHI exhibitions, bringing you first-hand information. |
| FT1 Series Frameless Motor Catalog — Catalog — English — PDF — 2026-06-08 | 3.19MB |
| FWD operation | FWD by default in the drive setting; Counterclockwise (CCW) when viewed from the axis extension side |
| Installation Method | Flange |
| Installation site: | 1. Indoor places free of corrosive gas or explosive gas; 2. Well-ventilated places with little dust, garbage and humidity; 3. Places for easy inspection and cleaning; 4. Use normally when the altitude is lower than 1000m, above 1000m, while derate when above 1000m. Refer to "3.3 Derating Characteristics"; 5. Places free of intense electric or magnetic fields; 6. Places away from heat sources such as furnaces; 7. Not applicable to vacuum environments; 8. Concentric installation as required |
| Insulation Class | F |
| Insulation Resistance | 48V DC, >10M&Omega |
| Insulation Voltage | AC1500V, 1 minute(220V) |
| Protection Level | IP67(except axis extension) |
| Servo System | Servo motor drive system products and solutions. |
| Solar Irrigation System | Solar irrigation system products and solutions. |
| Storage Environment | When storing the motor without electricity, observe the following environmental requirements; 1. Storage temperature -20℃~+60℃(no freezing); 2. Storage humidity 20%~~80%RH(no condensing) |
| Work Mode | S1(Continuous) |
| Working humidity | 20%~ 90%(no condensing) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for FT1. For a missing document or a specific revision, our experts send it to you.
The Veichi FT1 is a flange-mounted frameless permanent magnet motor for direct drive in S1 continuous operation, with IP67 protection.
| Parameter | Value |
|---|---|
| Ambient temperature | -20℃~40℃(no freezing); (Use according the derating curve above 40℃) |
| Corporate | Corporate products and information |
| Energy Storage Solution | Residential, C&I energy storage system solutions. |
| Excitation mode | Permanent magnet |
| Exhibitions | VEICHI exhibitions, bringing you first-hand information. |
| FT1 Series Frameless Motor Catalog — Catalog — English — PDF — 2026-06-08 | 3.19MB |
| FWD operation | FWD by default in the drive setting; Counterclockwise (CCW) when viewed from the axis extension side |
| Installation Method | Flange |
| Installation site: | 1. Indoor places free of corrosive gas or explosive gas; 2. Well-ventilated places with little dust, garbage and humidity; 3. Places for easy inspection and cleaning; 4. Use normally when the altitude is lower than 1000m, above 1000m, while derate when above 1000m. Refer to "3.3 Derating Characteristics"; 5. Places free of intense electric or magnetic fields; 6. Places away from heat sources such as furnaces; 7. Not applicable to vacuum environments; 8. Concentric installation as required |
| Insulation Class | F |
| Insulation Resistance | 48V DC, >10M&Omega |
| Insulation Voltage | AC1500V, 1 minute(220V) |
| Protection Level | IP67(except axis extension) |
| Servo System | Servo motor drive system products and solutions. |
| Solar Irrigation System | Solar irrigation system products and solutions. |
| Storage Environment | When storing the motor without electricity, observe the following environmental requirements; 1. Storage temperature -20℃~+60℃(no freezing); 2. Storage humidity 20%~~80%RH(no condensing) |
| Work Mode | S1(Continuous) |
| Working humidity | 20%~ 90%(no condensing) |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Frameless permanent magnet motor, flange mount, IP67



Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | FT1 |
| Manufacturer | Veichi |
Brushed DC Motors
Low voltage servo motor 400 W without brake, 17-bit encoder · Ref. : ELVM6040V48FH-M17-HD
Price on request
Brushed DC Motors
Low voltage servo motor 750 W, 48 VDC, 17-bit magnetic encoder · Ref. : ELVM8075V48FH-M17-HD
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details