SD500
Spindle Servo Drive with Dual Encoder Interface

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
Spindle Servo Drive with Dual Encoder Interface
The Veichi SD500 is a three-phase 380 to 440 V spindle servo drive for full closed-loop control of machine tool spindle motors, integrating speed, position and torque control.
Veichi SD500. The SD500 is a new generation spindle servo drive from Veichi, a machine tool spindle drive designed for closed-loop control of spindle motors. It integrates speed, position and torque control in a single unit.
Performance. Closed-loop vector control with two encoder interfaces (motor and spindle), speed range of 0 to 18000 rpm for a 4-pole motor, speed control range of 1:1000, starting torque of 200% of rated torque at 0 Hz, position control accuracy of ±1 pulse and torque response below 10 ms.
Interfaces and connectivity. One pulse input (quadrature, direction + pulse, or CW/CCW), two encoder inputs, one encoder output in crossover, 7 optocoupler-isolated digital inputs (NPN, PNP optional), 2 optocoupler-isolated digital outputs, 2 relay outputs, and two analog inputs (-10 V to +10 V, 0 to 10 V, 0 to 20 mA optional) with one analog output (0 to 10 V, 0 to 20 mA optional). The drive has no bus interface.
Functions. C-axis control, rigid tapping compatible with a variety of control systems (tapping error 2%), thread cutting, electronic gear, reaming, zero speed locking, and quasi-stop positioning with 8 positions selectable by terminals.
Power and environment. Three-phase 380 V to 440 V, 50/60 Hz supply, efficiency of 96% or more, power factor of 0.94 or more with DC reactor, overload capacity of 200% of rated current for 20 s, forced air cooling, IP20 protection, operating temperature of -10 to +50 °C (derating above 40 °C, maximum 60 °C at no load), humidity of 5 to 95% RH without condensation, altitude below 1000 m with 1% derating per 100 m above that, vibration of 5.9 m/s² (0.6 g) between 9 and 200 Hz. Wall-mounted or cabinet installation.
Documentation and compliance. The drive is supplied with CE certificates (EMC and LVD) and the AC Drive PC software V1.0.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SD500. For a missing document or a specific revision, our experts send it to you.
The Veichi SD500 is a three-phase 380 to 440 V spindle servo drive for full closed-loop control of machine tool spindle motors, integrating speed, position and torque control.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Spindle Servo Drive with Dual Encoder Interface

1S Drives



Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SD500 |
| Manufacturer | Veichi |
Servo Drives Systems
ESP32-C3 Robot Control Board with Motor and Servo Drivers · Ref. : DFR1063
Price on request
Servo Drives Systems
AC servo motor 5 kW 400 V 3000 r/min with brake · Ref. : R88M-K5K030F-BS2
Price on request
Servo Drives Systems
AC servo motor 1000 W, 130 mm flange, 23-bit absolute encoder · Ref. : ELM2M-1000LB130F-H
Price on request
Servo Drives Systems
ESP32 servo driver expansion board with built-in WiFi and Bluetooth · Ref. : ESP32
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details