7.3INCH-E-PAPER-HAT-G
7.3-inch color e-Paper display with Raspberry Pi HAT

- Outline Dimensions
- 16s
- BUSY
- Busy status output pin
- CLK
- SPI SCK pin
- Cs
- SPI chip selection, low active
7.3-inch color e-Paper display with Raspberry Pi HAT
Waveshare E-Paper Panels & Driver Boards
HAT expansion board for Raspberry Pi driving a 7.3-inch color e-Paper display (800 × 480) in red, yellow, black and white. Suited to low-power display applications.
Overview. The Waveshare 7.3INCH-E-PAPER-HAT-G is an e-Paper HAT for Raspberry Pi with a 7.3-inch display at 800 × 480 resolution showing four colors: red, yellow, black and white.
Main characteristics. The display offers a resolution of 800 × 480 and red, yellow, black and white rendering. Its typical power consumption is below 85 mW.
Interfaces and connectivity. The HAT connects directly to the standard 40-pin GPIO header of Raspberry Pi boards. It communicates over SPI through the CLK, DIN, CS, DC, RST and BUSY pins.
Power and environment. The VCC pin accepts a 3.3 V or 5 V supply, with a common GND.
Typical uses. This HAT suits displaying information on a fixed support, as the e-Paper panel retains its image without continuous power.
Integration. The SPI interface and the DC, RST and BUSY control signals allow control from a program running on Raspberry Pi.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 7.3INCH-E-PAPER-HAT-G, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| BUSY | Busy status output pin |
| Category | Boards / Kits (420) Displays (249) Cameras (95) HATs (231) All-in-one (8) HomeLab (6) Robots (31) Portable Gaming (5) Accessories (118) |
| CLK | SPI SCK pin |
| Cs | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| DIN | SPI MOSI pin |
| Display size | <85mW (typ.) |
| Dot Pitch | <0.01uA (almost none) |
| GND | Ground |
| Outline Dimensions | 16s |
| Pi Header | standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards |
| Resolution | >170° |
| RST | External reset, low active |
| VCC | Power (3.3V / 5V input) |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for 7.3INCH-E-PAPER-HAT-G. For a missing document or a specific revision, our experts send it to you.
HAT expansion board for Raspberry Pi driving a 7.3-inch color e-Paper display (800 × 480) in red, yellow, black and white. Suited to low-power display applications.
| Parameter | Value |
|---|---|
| BUSY | Busy status output pin |
| Category | Boards / Kits (420) Displays (249) Cameras (95) HATs (231) All-in-one (8) HomeLab (6) Robots (31) Portable Gaming (5) Accessories (118) |
| CLK | SPI SCK pin |
| Cs | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| DIN | SPI MOSI pin |
| Display size | <85mW (typ.) |
| Dot Pitch | <0.01uA (almost none) |
| GND | Ground |
| Outline Dimensions | 16s |
| Pi Header | standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards |
| Resolution | >170° |
| RST | External reset, low active |
| VCC | Power (3.3V / 5V input) |
Answers to the questions that the recorded characteristics of 7.3INCH-E-PAPER-HAT-G can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "CLK": SPI SCK pin.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
7.3-inch color e-Paper display with Raspberry Pi HAT

ReTerminal E1002 | E Ink Spectra 6 Full Color ESP32-S3 ePaper Display with 3-Month Battery Life

Sticky | 3.97'' AI Magnetic ePaper Family Note Display

10.3'' Monochrome ePaper Display | Low-Power TTL ePaper Display

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 7.3INCH-E-PAPER-HAT-G |
| Manufacturer | Waveshare Electronics |
E-Paper Panels and Driver Boards
10.3-inch monochrome ePaper display, low-power TTL interface
Price on request
E-Paper Panels and Driver Boards
Universal e-Paper raw panel driver shield with MX25R6435F Flash
Price on request
E-Paper Panels and Driver Boards
7.3-inch full-colour e-paper HMI terminal with ESP32-S3 · Ref. : 100017057
Price on request
E-Paper Panels and Driver Boards
3.97-inch magnetic ePaper display with touch and Wi-Fi · Ref. : 100056818
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details