Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

CP2102-EVAL-BOARD – CP2102 evaluation board, USB to RS232 bridge with DB9 connector

CP2102 evaluation board, USB to RS232 bridge with DB9 connector

Microcontroller Development Boards

  • RS-485
  • RS-232
Manufacturer part number
CP2102-EVAL-BOARD
Manufacturer
Waveshare Electronics

Waveshare CP2102 evaluation board linking a USB port to an RS232 serial link through a DB9 connector, to connect a microcontroller or serial device to a computer.

Product overview

Overview. The Waveshare Electronics CP2102-EVAL-BOARD is a development board acting as a USB to serial converter, with a DB9 connector for RS232 links. It adds a COM port to a computer or can be used as a USB to TTL interface.

Main characteristics. The board is supplied with a USB cable, a male-to-female serial cable, two 4-pin wires and two 2-pin wires. It supports Windows 8, and VCP example code and a USBXpress driver library are provided.

Interfaces and connectivity. The TXD, RXD, RTS, CTS and GND signals provide a complete serial link with a microcontroller. In USB to TTL mode, the RXDJMP and TXDJMP jumpers are removed and no RS232 device is connected.

Power. The VCC pin provides a 5 V output to power the connected circuit.

Typical uses. Developing serial communication between a computer and a microcontroller, and testing RS232 and TTL links.

Connection to a microcontroller. Connect TXD to MCU.RX, RXD to MCU.TX, RTS to MCU.CTS, CTS to MCU.RTS and GND to the circuit ground. The signal direction is given in the manufacturer's data.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote