DC3V3
Compact DC-DC buck converter module, 3.3 V or 5 V output

- Interface on the left side
- Interface on the right side
- Input Voltage
- DC 5~36V
- Switching Frequency
- 500KHz
- Dimensions
- 33 × 16 × 5.7 (mm)
Compact DC-DC buck converter module, 3.3 V or 5 V output
The DC5-36-TO-DC3V3-5 is a Waveshare DC-DC buck voltage regulator module with configurable 3.3 V or 5 V output. It powers electronic boards from a DC source between 5 and 36 V.
Overview. The DC5-36-TO-DC3V3-5 DC-DC buck module from Waveshare Electronics is a non-isolated step-down converter with configurable 3.3 V or 5 V output. It accepts a DC input voltage between 5 and 36 V and delivers a regulated output level to power electronic circuits.
Main characteristics. The module offers a conversion efficiency of 90% and a switching frequency of 500 kHz. Its operating current ranges from 0 A to 4 A, and it can reach 5 A output under extreme conditions, provided adequate heat dissipation is ensured. Its dimensions are 33 × 16 × 5.7 mm, which eases integration into a compact design.
Interfaces and connections. The input is marked VIN+ (power input positive) and VIN- (power input negative). The output is marked VOUT(+) (power output positive) and GND(-) (power output negative). The interfaces are placed on the left and right sides of the module.
Typical uses. This module suits powering electronic boards and modules at 3.3 V or 5 V from a DC supply, for example boards from the Raspberry Pi or ESP32 families offered in the Waveshare catalogue.
Integration. As the module is designed for high-current operation, adequate heat dissipation must be provided when the output is loaded near its limit. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DC3V3, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 33 × 16 × 5.7 (mm) |
| Output voltage | DC 3.3V |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Conversion Efficiency | 90% |
| Input Voltage | DC 5~36V |
| Interface on the left side | Interface on the right side |
| Operating Current | 0A~4A (can reach up to 5A output under extreme conditions, but adequate heat dissipation is required) |
| Switching Frequency | 500KHz |
| VIN- — Power input negative — GND(-) | Power output negative |
| VIN+ — Power input positive — VOUT(+) | Power output positive |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for DC3V3. For a missing document or a specific revision, our experts send it to you.
The DC5-36-TO-DC3V3-5 is a Waveshare DC-DC buck voltage regulator module with configurable 3.3 V or 5 V output. It powers electronic boards from a DC source between 5 and 36 V.
| Parameter | Value |
|---|---|
| Dimensions | 33 × 16 × 5.7 (mm) |
| Output voltage | DC 3.3V |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Conversion Efficiency | 90% |
| Input Voltage | DC 5~36V |
| Interface on the left side | Interface on the right side |
| Operating Current | 0A~4A (can reach up to 5A output under extreme conditions, but adequate heat dissipation is required) |
| Switching Frequency | 500KHz |
| VIN- — Power input negative — GND(-) | Power output negative |
| VIN+ — Power input positive — VOUT(+) | Power output positive |
Answers to the questions that the recorded characteristics of DC3V3 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Operating Current": 0A~4A (can reach up to 5A output under extreme conditions, but adequate heat dissipation is required).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Compact DC-DC buck converter module, 3.3 V or 5 V output

DC-DC Buck Converter 7-24V to 5V 4A

CUWB YMD-6WR3

SMD Unregulated Output (0.2-2W)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DC3V3 |
| Manufacturer | Waveshare Electronics |
Non-Isolated DC/DC Converters
Adjustable Step-Down DC/DC Converter 3A · Ref. : 106990005
Price on request
Non-Isolated DC/DC Converters
1200 V 150 A SiC power module, half-bridge · Ref. : HCS09FC120E1Q1
Price on request
Non-Isolated DC/DC Converters
1600 W non-isolated DC/DC converter, 3.3 V output · Ref. : 10-1600W
Price on request
Non-Isolated DC/DC Converters
DC-DC Boost Converter Module with 5 V USB Output · Ref. : FIT0471
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details