Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

LC76G – Multi-GNSS receiver module GPS BDS GLONASS Galileo QZSS

Multi-GNSS receiver module GPS BDS GLONASS Galileo QZSS

GPS Modules

  • GNSS
Manufacturer part number
LC76G
Manufacturer
Waveshare Electronics

Waveshare LC76G multi-GNSS receiver module supporting GPS, BeiDou, GLONASS, Galileo and QZSS, for positioning and location tracking on a microcontroller or embedded board.

Product overview

Overview. The Waveshare Electronics LC76G GNSS module is a multi-constellation positioning receiver using GPS, BDS, GLONASS, Galileo and QZSS signals, built on the AG3352 chip platform.

Main characteristics. The module provides 47 tracking channels on the L1 band, a sensitivity of -147 dBm, a position accuracy of 1.5 m CEP, a speed accuracy of 0.1 m/s and a timing accuracy of 30 ns. Time to first fix (TTFF) is 26 s autonomous, 12 s with EASY and 5 s with EPO, and A-GNSS is supported.

Interfaces and connectivity. The LC76G communicates over UART at 9600 to 921600 bps, 115200 bps by default, and over I2C at up to 400 Kbps. The RX and TX pins connect to the TX and RX of the microcontroller, while the SDA and SCL pins carry the I2C link. A RST pin provides reset and a PPS pin serves as GPS status indicator.

Power. The module is powered at 3.3 V or 5 V on the VCC pin, with a common GND pin.

Data update rate. The GNSS data update rate reaches 10 Hz maximum, with a 1 Hz default.

Typical uses. This module suits integration into an embedded system requiring GNSS positioning, connected to a microcontroller via UART or I2C.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All GPS Modules
Request a quote