SIM8200EA-M2 – Industrial 5G NR router with Snapdragon X55, Gigabit Ethernet and Wi-Fi

Industrial 5G NR router with Snapdragon X55, Gigabit Ethernet and Wi-Fi

5G NR Industrial Routers

  • -35 ~ +75ºC
  • 12 ~ 24V
  • Interfaces
  • -40 ~ +85ºC
Manufacturer part number
SIM8200EA-M2
Manufacturer
Waveshare Electronics
Operating Temperature
-35 ~ +75ºC
Power input range
12 ~ 24V

The SIM8200EA-M2 is an industrial 5G NR router with dual-band Wi-Fi, Gigabit Ethernet and RS232 and RS485 serial ports, designed for reliable wireless links on site.

Product overview

Overview. The SIM8200EA-M2 from Waveshare Electronics is an industrial 5G router (wireless CPE) with an onboard Snapdragon X55 module, for connecting equipment to the Internet over 5G, 4G and 3G networks.

Main characteristics. Stated data rate of 2.4 Gbps downlink and 500 Mbps uplink on 5G Sub-6G. Sub-6G 5G bands in standalone mode (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, and in non-standalone mode (NSA): n41, n77, n78. Metal case, IP30 protection level, dimensions 195 × 107 × 37 mm.

Interfaces and connectivity. Four 10/100/1000 Mbit/s Ethernet LAN ports and one WAN port, with MDI/MDIX auto-negotiation and embedded 1.5 kV electromagnetic isolation; the WAN RJ45 can be used as an additional LAN port, giving five LAN ports in total. Wi-Fi IEEE 802.11b/g/n and IEEE 802.11 Wi-Fi 5 (a/b/g/n/ac) on 2.4 GHz and 5.8 GHz, 2T2R, AP mode supported, encryption methods WEP, WPA and WPA2. One RS232 and one RS485 serial port with embedded ESD protection. One M.2 connector holding the supplied SIM8200EA-M2 module, three Mini PCIe connectors including one for a further 4G module, a drawer SIM card slot with 15 kV ESD protection, and a TF card slot for external storage.

Power and environment. Power input of 12 to 24 V DC, with a DC 12 V / 2 A adapter supplied, embedded phase-reversal and over-voltage protection. Power consumption below 1 A at 12 V in data mode and below 500 mA in idle mode. Operating temperature -35 to +75 °C, storage temperature -40 to +85 °C, relative humidity 95 % non-condensing. A reset button restores factory settings after being held for 5 to 10 seconds.

Typical uses. Wireless Internet link for industrial equipment, gateway between controllers connected to the RS485 port and a remote network, on-site Wi-Fi access point. The PWR, SYS, 5G, 4G, WAN, LAN, TF, 2.4G and 5.8G indicators help with diagnostics.

See all specifications

Highlights

  • Dimensions: 195 × 107 × 37mm
  • Authentication: supports encryption methods including WEP, WPA, WPA2, etc.
  • Case: Metal case, IP30 protection level
  • Indicators: PWR, SYS, 5G, 4G, WAN, LAN, TF, 2.4G, 5.8G status indicators
  • Interfaces: Interfaces
  • Mechanical: Mechanical

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -35 ~ +75ºC — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All 5G NR Industrial Routers
Request a quote