SIM908
GSM/GPRS/GPS quad-band Arduino shield

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
GSM/GPRS/GPS quad-band Arduino shield
Arduino Official & Compatible Shields
GSM/GPRS/GPS Arduino shield based on the SIM908 module from Waveshare, adding mobile telephony, GPRS data transfer and GPS positioning to an Arduino board.
SIM908 Arduino shield. The Waveshare GSM/GPRS/GPS shield based on the SIM908 module plugs directly onto an Arduino board through its expansion connector and combines a quad-band 850/900/1800/1900 MHz GSM/GPRS module, a 42-channel GPS receiver and a phone module with speaker and microphone.
Main characteristics. The GSM/GPRS module operates in GPRS class 8/10 with a maximum downlink of 85.6 kbps and supports CSD up to 14.4 kbps, SMS in text and PDU modes, and the Tricodec, half rate, full rate and enhanced full rate voice codecs. The GPS L1 C/A receiver has a tracking sensitivity of -160 dBm and a cold start sensitivity of -143 dBm, with a horizontal accuracy below 2.5 m CEP and a time to first fix of 30 s in cold start and 1 s in hot start.
Connectivity and interfaces. The shield provides an SMA GSM antenna connector, a GPS antenna connector, a USB to UART interface with CP2102 for debugging, a SIM card slot and an earphone jack. It is controlled with AT commands (GSM 07.07, 07.05 and SIMCom enhanced AT commands), and a 74HC125 allows the GSM and GPS ports to share a single serial port.
Power and environment. The GPRS supply operates from 3.2 to 4.8 V and the GPS supply from 3.0 to 4.5 V, with an operating temperature range of -40 °C to +85 °C. The GSM engine draws 77 mA in acquisition and 76 mA in tracking. A 6 V to 9 V DC power jack is provided on the board.
Typical uses. This shield suits remote communication of an Arduino system over GPRS data, SMS messaging, hands-free telephony through the integrated speaker and microphone, and GPS positioning.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SIM908. For a missing document or a specific revision, our experts send it to you.
GSM/GPRS/GPS Arduino shield based on the SIM908 module from Waveshare, adding mobile telephony, GPRS data transfer and GPS positioning to an Arduino board.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
GSM/GPRS/GPS quad-band Arduino shield

Spartan Edge Accelerator Board - Arduino FPGA Shield with ESP32

3Dpad touchless gesture controller Arduino shield

CAN FD Shield for Arduino - CAN-FD, CAN 2.0, industrial standard 9-pin sub-D, high-speed SPI interface, selectable OBD-II and CAN standard pinouts, adjustable chip select and INT pins

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SIM908 |
| Manufacturer | Waveshare Electronics |
Arduino Official & Compatible Shields
Arduino UNO compatible board with ATmega328P and micro-USB · Ref. : OAC0328MU
Price on request
Arduino Official & Compatible Shields
Long range LoRa 868 MHz Arduino shield with L80 GPS
Price on request
Arduino Official & Compatible Shields
Four-channel relay shield for Arduino
Price on request
Arduino Official & Compatible Shields
Dual band VHF/UHF radio shield for Arduino
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details