WIFI-LPT100
802.11 b/g/n UART Wi-Fi module with external antenna

- Hardware — Operating Temp.
- -40℃- 85℃
- Wireless Frequency Range
- 2.412GHz-2.484GHz
- Hardware — Data Interface
- UART
- Interface
- 2.0mm, 1x10
802.11 b/g/n UART Wi-Fi module with external antenna
802.11 b/g/n Wi-Fi module with UART interface, configurable through an AT instruction set, for connecting serial equipment to a wireless network.
Overview. The Waveshare Electronics WIFI-LPT100 is a UART Wi-Fi module, identified by its reference WIFI-LPT100 and designed to add wireless connectivity to equipment with a serial link. It measures 22 mm x 13.5 mm x 6 mm.
Its power consumption is described as ultra low, with an emitting current of about 200 mA. It is supplied with an external antenna connected through an I-PEX connector.
Interfaces and connectivity. The UART interface and the 1x10 expansion connector with 2 mm pitch allow connection to the host system. Configuration is performed through the AT instruction set or a web page, and firmware can be upgraded wirelessly. The WEP/WPA-PSK/WPA2-PSK security algorithms and WEP64/WEP128/TKIP/AES encryption are supported, along with the IPv4, TCP/UDP and HTTP network protocols.
Power and environment. The supply voltage is 2.8 V to 3.6 V. The operating temperature range is -40 ℃ to 85 ℃, and the storage temperature range is -45 ℃ to 125 ℃. The module is RoHS compliant and certified FCC/CE.
Typical uses and integration. Its UART interface and AT command set make it suitable for integration with a microcontroller or PLC to transmit data over a Wi-Fi network. It is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for WIFI-LPT100, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Antenna | external |
| Category | Raspberry Pi (921) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (317) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Dimension(mm) | 22 x 13.5 |
| Hardware — Data Interface | UART |
| Hardware — Dimension | 22mm x 13.5mm x 6mm |
| Hardware — Expansion connector | 1x10, 2mm pitch pinheader |
| Hardware — Operating current | Emitting : ~200mA |
| Hardware — Operating Temp. | -40℃- 85℃ |
| Hardware — Standard Certification | RoHS compliant |
| Hardware — Storage Temp. | -45℃- 125℃ |
| Hardware — Voltage Level | 2.8~3.6V |
| Interface | 2.0mm, 1x10 |
| Power consumption | ultra low |
| Shield case | × |
| Software — Configuration | AT+instructions set, Web page |
| Software customization | Supports user customized web page |
| Software — Encryption | WEP64/WEP128/TKIP/AES |
| Software — Firmware Upgrading | Web |
| Software — Network Protocol | IPv4, TCP/UDP/HTTP |
| Software — Security Algorithm | WEP/WPA-PSK/WPA2-PSK |
| Software — Wireless Network Type | STA/AP/STA+AP |
| Suit for | low flow |
| Wireless Antenna | External : I-PEX connector |
| Wireless Frequency Range | 2.412GHz-2.484GHz |
| Wireless Protocol | 802.11 b/g/n |
| Wireless — Rx Sensitivity | 802.11b: -93 dBm (@11Mbps,CCK) |
| Wireless — Standard Certification | FCC/CE |
| Wireless — TX Power | 802.11b: +16 +/-2dBm (@11Mbps) |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for WIFI-LPT100. For a missing document or a specific revision, our experts send it to you.
802.11 b/g/n Wi-Fi module with UART interface, configurable through an AT instruction set, for connecting serial equipment to a wireless network.
| Parameter | Value |
|---|---|
| Antenna | external |
| Category | Raspberry Pi (921) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (317) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Dimension(mm) | 22 x 13.5 |
| Hardware — Data Interface | UART |
| Hardware — Dimension | 22mm x 13.5mm x 6mm |
| Hardware — Expansion connector | 1x10, 2mm pitch pinheader |
| Hardware — Operating current | Emitting : ~200mA |
| Hardware — Operating Temp. | -40℃- 85℃ |
| Hardware — Standard Certification | RoHS compliant |
| Hardware — Storage Temp. | -45℃- 125℃ |
| Hardware — Voltage Level | 2.8~3.6V |
| Interface | 2.0mm, 1x10 |
| Power consumption | ultra low |
| Shield case | × |
| Software — Configuration | AT+instructions set, Web page |
| Software customization | Supports user customized web page |
| Software — Encryption | WEP64/WEP128/TKIP/AES |
| Software — Firmware Upgrading | Web |
| Software — Network Protocol | IPv4, TCP/UDP/HTTP |
| Software — Security Algorithm | WEP/WPA-PSK/WPA2-PSK |
| Software — Wireless Network Type | STA/AP/STA+AP |
| Suit for | low flow |
| Wireless Antenna | External : I-PEX connector |
| Wireless Frequency Range | 2.412GHz-2.484GHz |
| Wireless Protocol | 802.11 b/g/n |
| Wireless — Rx Sensitivity | 802.11b: -93 dBm (@11Mbps,CCK) |
| Wireless — Standard Certification | FCC/CE |
| Wireless — TX Power | 802.11b: +16 +/-2dBm (@11Mbps) |
Points to check before using WIFI-LPT100 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Hardware — Operating current | Emitting : ~200mA |
| Hardware — Voltage Level | 2.8~3.6V |
| Power consumption | ultra low |
| Wireless — TX Power | 802.11b: +16 +/-2dBm (@11Mbps) |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of WIFI-LPT100 can answer. A question is not asked when nothing is recorded to answer it.
-40℃- 85℃ (source: Hardware — Operating Temp.).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
802.11 b/g/n UART Wi-Fi module with external antenna

WiFi Espressif ESP32

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Arduino Open Source

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Voice Processing

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | WIFI-LPT100 |
| Manufacturer | Waveshare Electronics |
Wi-Fi and Bluetooth Modules
Wi-Fi and Bluetooth LE module with PCB antenna · Ref. : ESP32-S3-WROOM-1-N4R2
Price on request
Wi-Fi and Bluetooth Modules
M.2 2230 Wi-Fi 6 and Bluetooth 5.3 Card · Ref. : AP12275-M2
Price on request
Wi-Fi and Bluetooth Modules
802.11b/g/n Wi-Fi and Bluetooth SoC Module · Ref. : MCC32SESP
Price on request
Wi-Fi and Bluetooth Modules
Wi-Fi and NFC module with ARM Cortex-M3 microcontroller · Ref. : DFR0477
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details