Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

EOE-W55 – Ethernet, Wi-Fi 4 and Bluetooth LE system-on-module

Ethernet, Wi-Fi 4 and Bluetooth LE system-on-module

Bluetooth Modules

  • Wi-Fi
  • Bluetooth
  • Ethernet
Manufacturer part number
EOE-W55
Manufacturer
WIZnet

The EOE-W55 is a WIZnet system-on-module combining wired Ethernet, Wi-Fi 4 and Bluetooth LE, for connected applications on IPv4 networks.

Product overview

Overview. The WIZnet EOE-W55 is a system-on-module combining an ESP32-S3 microcontroller and the W5500 hardwired TCP/IP controller, providing wired Ethernet, Wi-Fi 4 and Bluetooth LE in a single module.

Main characteristics. The ESP32-S3 is a dual-core Xtensa LX7 running up to 240 MHz. The 10/100 Mbps Ethernet interface supports IPv4. The W5500 hardwired TCP/IP stack handles TCP, UDP, ICMP, IPv4, ARP, IGMP and PPPoE with 8 sockets and a 32 KB TX/RX buffer. The module measures 18.3 x 26.15 mm with a 1.1 mm pin pitch.

Interfaces and connectivity. Wi-Fi 4 (802.11 b/g/n, 2.4 GHz) and Bluetooth LE are connected to an antenna through a U.FL connector. The module exposes GPIO, ADC, I2C, SPI, USB and UART0 interfaces, with an SPI connection between the ESP32-S3 and the W5500. Debugging is available via native USB and UART0.

Power. The module runs from a single 3.3 V rail.

Typical uses. The module suits equipment that must communicate over wired and wireless networks at the same time, the integrated TCP/IP stack offloading protocol handling from the processor.

Development. The EOE-W55 is supported by the ESP-IDF, Arduino and Zephyr development frameworks. An EOE-W55-EVB evaluation board is available for implementation.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Bluetooth Modules
Request a quote