WL-D82 – Industrial 4G cellular modem with dual RS-232 and RS-485 serial ports

Industrial 4G cellular modem with dual RS-232 and RS-485 serial ports

Cellular Modems and Dongles

  • SMA-K(Female), 50Ω
  • CE; RoHS; CCC
  • C lass E2 (27dBm±3dB)
  • Metal
Manufacturer part number
P0028
Manufacturer
Wlink
Antenna
SMA-K(Female), 50Ω
Approval
CE; RoHS; CCC

The Wlink WL-D82 is an industrial cellular modem (DTU) that converts RS-232 and RS-485 serial data into IP data and transmits it to a data center over 4G mobile networks.

Product overview

It is intended for industrial IoT applications.

Main characteristics. The WL-D82 integrates an industrial FDD-LTE / TDD-LTE 4G module, a pluggable terminal block connector and a metal housing. It supports standard PPP, TCP/IP and UDP/IP protocols, short message service (SMS), transparent data transmission, and APN and VPDN wireless private networks. It connects to data service centers with dynamic IP addresses and is manageable remotely through the WLINK M2M platform.

Interfaces and connectivity. Two serial ports, 1xRS-232 and 1xRS-485, with rates from 300 to 115200 bps, a standard SIM/R-UIM card slot and an SMA-K (female) 50Ω antenna connector. The modem stays always online once powered on, automatically redials when offline, and can be configured through its built-in menu, a PC configuration tool, AT commands or SMS.

Power and environment. DC input from 7.5 to 26 V, standard 12 V/1 A power adapter. Consumption of 80 mA at 12 V on average in transfer mode and 7 mA at 12 V maximum in idle mode. Operating temperature from -30 to +75 °C, storage temperature from -40 to +85 °C, relative humidity below 95 % non-condensing. Dimensions 72.2 x 64 x 25.5 mm excluding antenna, weight 150 g excluding accessories, wall or desktop mounting.

Typical uses. Sending data from sensors and PLCs to a remote server, using the RS-232 and RS-485 ports and transparent data transmission. Approved to CE, RoHS and CCC standards.

See all specifications

Highlights

  • Always online: automatically attaches 4G Celullar when powered on
  • Antenna: SMA-K(Female), 50Ω
  • Dimension: 72.2mm x 64mm x 25.5mm (not including antenna)
  • GPRS/EDGE: C lass E2 (27dBm±3dB)
  • Housing: Metal
  • Installation: Wall Mount or Desktop

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote