Overview. The Yuwei MULTI-CAMERA-DASH-CAM is a 4G multi-camera in-vehicle video terminal, a dash cam able to handle several video channels at once. According to the manufacturer, the system supports 2 to 6 camera channels, for example at the front and rear of the vehicle.
Cameras. The system integrates a 1080P front ADAS camera with MIPI sensor (H:112°, V:55°), a single-pass AHD DSM camera with infrared night vision (H=60°, V=42°) and an in-car AHD 720P camera with light sensor and infrared night vision. A fourth AHD 720P camera channel is also provided.
Storage and recording. Memory comprises 256 MB Flash and 1 GB DDR. Two TF card slots (TF×2) support circular storage on each of the two cards, with 4 GB to 2 TB capacity under the patented DXR streaming storage format.
Location and connectivity. The terminal includes a GPS module supporting GPS and BDS, a 3-axis accelerometer, a built-in ceramic GPS antenna, 4G connectivity with built-in antenna, 802.11b/g/n Wi-Fi and a micro SIM slot. An RS232 interface and a micro USB 5-pin data port are available.
Audio and controls. Two built-in silicon microphones and an 8 ohm 1.5 watt speaker with sound cavity provide audio. A standard emergency alarm key, a two-color indicator light and a reset button (long press of the power button for 8 seconds) complete the controls.
Power and environment. The system runs on 12 V or 24 V through a BMW connector carrying power, ground, ACC, left and right turn signal cables and an SOS cable. Consumption is 500 mA to 1 A at 12 V depending on whether algorithms are enabled, and less than or equal to 3 mA with ACC OFF. Operating temperature ranges from -20 ℃ to 70 ℃, storage from -40 ℃ to 85 ℃. The product complies with the JT/T794 standard and withstands 6 kV contact and 10 kV air electrostatic discharge.
Typical uses. This system is intended for professional drivers, commercial vehicle fleets, taxis, trucks and long-distance passenger vehicles, where it helps keep multi-angle video evidence in the event of an incident.