Low-light imaging, network bandwidth, and video retention sizing
In physical security deployments, night-time image clarity determines whether recorded footage remains actionable. IP Cameras must preserve contrast and color cues without overexposing dark scenes. The Hikvision IPTRZS2UY dome operates down to 0.0008 Lux in color at F1.2 with AGC active and 0 Lux under IR illumination, whereas the Hikvision DS-2CD1183G2-LIU-F reaches 0.01 Lux at F2.0 with a microSD slot supporting up to 512 GB.
Bandwidth and storage capacity depend on aggregate camera bitrates and the required recording retention window. Pairing H.265 streams such as those on the Hanwha Vision QND-6012R with the 16-channel Hanwha Vision PRN-1600B2 reduces disk footprint while preserving scene detail. In Network Video Recorders, ARB support on the PRN-1600B2 helps protect recording continuity when temporary network interruptions occur between edge cameras and central storage.
Perimeter coverage, environmental protection, and active deterrence
Monitoring perimeters, loading bays, and exposed facades requires enclosures matched to site weather and mechanical hazards. The Hanwha Vision PNM-C32083RVQ-CA combines four 4 K AI channels with IR illumination, PoE power, IP66 sealing, and a minimum operating temperature of -40 °C or lower, alongside CAN bus and MQTT interfaces. Buyers must verify switch PoE power budgets and cable distances in the product datasheet before installation.
For locations exposed to tampering or impacts, mechanical protection ratings guide selection across dome and turret housings. The Hikvision IPTRZS2UY carries IP66 and IK10 protection per IEC 62262:2002, adding a motorized zoom lens, active strobe light, and audible alarm for perimeter deterrence. The Hikvision DS-2CD1183G2-LIU-F provides IP67 and IK08 ratings with 0° to 355° pan and 0° to 75° tilt mechanical adjustment.
Access control architecture, credential technologies, and readers
A cohesive site architecture connects Access Controllers, Face Recognition Terminals, Intercoms and Video Door Stations, and Alarm Panels over compatible interfaces. Selecting credential technologies balances convenience and assurance across encrypted RFID or NFC badges, PIN keypads, and facial verification at restricted doors. Specifiers should check supported reader protocols, lock relay ratings, and power supply requirements directly in each manufacturer datasheet.
Physical integration also relies on wired alarm inputs and outputs linking video analytics to door hardware and intrusion systems. The Hanwha Vision PRN-1600B2 provides eight alarm inputs, four alarm outputs, and a 3.5 mm audio output jack, while the Hanwha Vision QND-6012R includes one alarm input and one alarm output to coordinate video verification events with Alarm Panels and Access Controllers.
Ethernet network hardening, PoE segmentation, and GDPR rules
Deploying cameras and readers over Ethernet and PoE infrastructure requires strict VLAN segmentation to isolate security traffic from corporate workstations. Built-in safeguards such as IP-based access control on the Hanwha Vision QND-6012R restrict unauthorized management sessions on field devices. System integrators should also verify electromagnetic compliance documented in the datasheets, including EN 55032:2015 and EN 50130-4:2011+A1:2014 listed for the Hikvision IPTRZS2UY.
Processing video streams and biometric templates on Face Recognition Terminals triggers strict GDPR obligations regarding proportionality and data security. AI object attribute search on the Hanwha Vision PRN-1600B2 covering human, face, vehicle, and license plate attributes requires defined retention limits, privacy masking zones, and role-based operator privileges. Audit logs and encrypted transport help data controllers document compliance throughout the system lifecycle.
Selection criteria and complete on-quotation BOM sourcing
Building a complete project bill of materials spans six complementary families: IP Cameras, Network Video Recorders, Access Controllers, Face Recognition Terminals, Intercoms and Video Door Stations, and Alarm Panels. For every line item, buyers must check the datasheet for operating temperature limits, ranging from 0 °C or higher on the Hanwha Vision PRN-1600B2 to -40 °C or lower on the Hanwha Vision PNM-C32083RVQ-CA, plus lens geometry and mounting hardware.
Atlas Electronics supports system integrators and industrial procurement teams with consolidated on-quotation supply from field sensors to central recording servers. Grouping compatible PoE, Ethernet, and RFID hardware into a single bill of materials helps align electrical, mechanical, and network specifications across the site while streamlining multi-brand sourcing through a single B2B point of contact.
Frequently asked questions
How should bandwidth and storage be sized for IP Cameras and Network Video Recorders?
Sizing combines resolution, frame rate, H.265 compression (supported on the Hanwha Vision QND-6012R), and the required retention period in days. Pairing cameras with a 16-channel recorder like the Hanwha Vision PRN-1600B2 featuring ARB support helps maintain continuous recording across temporary network drops.
Which datasheet parameters matter most when selecting dome, turret, or multi-directional IP Cameras?
Check low-light sensitivity in Lux, IP66 or IP67 weather sealing, IK08 or IK10 impact resistance, and operating temperature limits from -10 °C on the Hanwha Vision QND-6012R down to -40 °C or lower on the Hanwha Vision PNM-C32083RVQ-CA, along with PoE power requirements and alarm interfaces.
How do you ensure compatibility across Access Controllers, RFID/NFC credentials, and Alarm Panels?
Verify the existing RFID or NFC card frequency, reader bus or Ethernet protocol, and dry-contact relay count in each datasheet. Wired alarm I/O interfaces, such as the 8 alarm inputs and 4 alarm outputs on the Hanwha Vision PRN-1600B2, bridge video events with access hardware and intrusion panels.
What network hardening and GDPR measures apply to video surveillance and Face Recognition Terminals?
Segment IP Cameras, Network Video Recorders, and Face Recognition Terminals onto dedicated Ethernet VLANs, enable IP-based access control, and configure privacy masking. Biometric templates and AI search attributes such as face or license plate records require strict retention schedules and role-based access logging.
Products mentioned
PRN-1600B2
Network Video Recorders
16-channel AI network video recorder with analytics · Ref. : PRN-1600B2
- In 8EA, Out 4EA
- Support
- 2-Way
Price on request
QND-6012R
IP Cameras
2 MP IR IP dome camera, H.265, 2.8 mm fixed lens
Price on request
PNM-C32083RVQ
IP Cameras
4-channel 4K AI multi-directional IP camera with IR · Ref. : PNM-C32083RVQ-CA
Price on request
DS-2CD27166G3-IPTRZS2UY
IP Cameras
16MP network dome camera with motorized zoom and audible alarm · Ref. : IPTRZS2UY
Price on request
DS-2CD1183G2-LIU-F
IP Cameras
8 MP Smart Hybrid Light Fixed Dome Network Camera · Ref. : DS-2CD1183G2-LIU-F
- Yes
Price on request
A project? Our engineers build the solution with you.
Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.
Request a quotation








