EU868 Channel Plans, 8 vs 16 Channels, and Concentrator Card Architectures
Sizing an LPWAN deployment begins with the EU868 channel plan and the number of simultaneous demodulation paths. An 8-channel LoRaWAN gateway handles the three mandatory join frequencies alongside five additional uplink channels, which covers most commercial building telemetry and industrial monitoring sites. Moving to 16-channel configurations addresses high-density zones where overlapping transmissions across dual sub-bands require extra parallel receive capacity.
Within the LoRaWAN Concentrator Cards (mPCIe / SPI) family, the RAKwireless 518016 module uses an mPCIe form factor with an SPI host interface, integrated GNSS / GPS, and digital input support. Because this specific SKU includes one RAK 2247 unit and lists the KR920 frequency band, buyers should confirm the EU868 variant on the datasheet before submitting a quotation request. For standalone deployment, the Winext GW5000A uses a Semtech SX 130 X chipset across 8 data transmission channels.
Indoor vs IP67 Outdoor Enclosures, PoE Power, and Thermal Envelopes
Selecting between Indoor LoRaWAN Gateways and Outdoor LoRaWAN Gateways depends on environmental exposure, ingress protection, and available cabling. For sheltered electrical rooms and plant offices, the RAKwireless 715170 features an IP20 to IP44 rating with PoE power and LoRaWAN EU868 support. When mounting on poles, rooftops, or exposed facades, the RAKwireless 715167 outdoor industrial gateway adds an IP67 enclosure, PoE input, and a minimum operating temperature of -20 °C.
Across the LoRaWAN Gateways, Concentrators & LPWAN Infrastructure range, the Winext GW5000A combines an IP67 housing with PoE power and full-duplex or half-duplex operation, with a claimed line-of-sight distance of up to 15 kilometers per the manufacturer website. For remote assets without grid power or Ethernet drops, the Milesight IoT SG50 solar gateway integrates built-in batteries inside an IP67 enclosure supporting LoRaWAN EU868.
Basics Station, MQTT Backhaul, VPN Tunnels, and Cellular Failover
Connecting field gateways to a LoRaWAN network server typically relies on Semtech Basics Station over secure WebSockets or an MQTT broker architecture. Both approaches minimize backhaul overhead while supporting remote packet forwarding and centralized fleet management. The RAKwireless 715170 and Milesight IoT SG50 both support MQTT alongside VPN tunneling to encrypt uplink sensor traffic across public or private IP networks.
Cellular failover maintains telemetry continuity when wired Ethernet or PoE links drop. Both RAKwireless 715170 and RAKwireless 715167 integrate 4 G LTE Cat 4 modems suited to continuous multi-sensor traffic, while the battery-powered Milesight IoT SG50 relies on a lower-power 4 G LTE Cat 1 modem. For programmable edge routing, the MultiTech MTCAP-L4E1-868-041 A pairs 8-channel 868 MHz reception with PoE, 4 G LTE Cat 4 connectivity, and the mPower programmable environment.
Cavity Filtering, RF Coexistence, GNSS Timing, and External Antennas
Co-locating 868 MHz LoRaWAN antennas on shared masts or rooftops near 800 MHz and 900 MHz cellular base stations exposes the receiver front end to out-of-band blocking. Installing a cavity filter tuned to the EU868 sub-band rejects adjacent-channel interference and preserves link margin. Models built for external RF cabling, such as the RAKwireless 715170 and the MultiTech MTCAP-L4E1-868-041 A with external LoRa antenna support, allow inline cavity filtering.
Accurate time synchronization via GNSS / GPS improves frame timestamping for Class B beacons and multi-gateway geolocation calculations. Native GNSS / GPS support is included on the RAKwireless 715167, the Milesight IoT SG50, and the RAKwireless 518016 concentrator card. Before finalizing RF hardware, buyers must inspect each datasheet for filter insertion loss, coaxial connector type, and regional antenna gain limits.
Datasheet Verification Checklist and Quotation Supply via Atlas Electronics
Before issuing a purchase inquiry for LoRaWAN gateways or LPWAN concentrators, engineering buyers should audit the manufacturer datasheet against site constraints. Key parameters include the exact regional frequency plan, such as EU868 versus KR920 on specific SKUs, the PoE voltage standard, IP20 to IP44 or IP67 sealing, and included accessories, as seen on the MultiTech MTCAP-L4E1-868-041 A supplied with an EU/GB accessory kit.
Teams should also confirm industrial SIM compatibility for 4 G LTE Cat 1 or Cat 4 failover, coaxial jumper lengths for external antennas, and pole-mounting hardware for solar or outdoor units. Atlas Electronics handles supply across these catalogued references on quotation, consolidating multi-site quantities, power injectors, and RF accessories into a single procurement package.
Frequently asked questions
When should a buyer choose an 8-channel versus a 16-channel EU868 LoRaWAN gateway?
An 8-channel gateway simultaneously monitors the three mandatory EU868 join channels and five extra channels, covering most industrial and smart-building deployments. A 16-channel architecture doubles parallel receive capacity to handle dense sensor fleets or reduce packet collisions across dual sub-bands.
Why add an external cavity filter on an 868 MHz LoRaWAN gateway?
A cavity filter attenuates strong out-of-band signals from nearby 800 MHz or 900 MHz cellular transmitters that could desensitize the 868 MHz receiver. Gateways with external antenna ports like the RAKwireless 715170 or MultiTech MTCAP-L4E1-868-041 A allow inline cavity filtering once insertion loss is checked in the datasheet.
How do Basics Station, MQTT, and 4 G LTE failover work together for backhaul?
Basics Station provides an encrypted WebSocket link to a LoRaWAN network server, whereas MQTT enables direct telemetry integration as supported by the RAKwireless 715170 and Milesight IoT SG50. Built-in 4 G LTE Cat 1 or Cat 4 modems maintain backhaul connectivity if wired PoE Ethernet drops.
What must be checked before sourcing an mPCIe SPI concentrator card on quotation?
Buyers must confirm mPCIe slot mechanical clearance, host SPI pin mapping, GNSS / GPS integration, and the exact regional RF band. Because the RAKwireless 518016 lists KR920 in its specification table, verify the EU868 SKU and datasheet parameters before ordering.
Products mentioned
SG50
LoRaWAN Gateways, Concentrators & LPWAN Infrastructure
Solar LoRaWAN gateway with built-in batteries and cellular backhaul · Ref. : SG50
- -20°C to +50°C
Price on request
MTCAP-L4E1-868-041A
LoRaWAN Gateways, Concentrators & LPWAN Infrastructure
8-channel 868 MHz LoRaWAN gateway with LTE Cat 4 · Ref. : MTCAP-L4E1-868-041A
Price on request
RAK7268CV2
Indoor LoRaWAN Gateways
Indoor LoRaWAN gateway 8-channel with LTE Cat 4 and external antenna · Ref. : 715170
Price on request
RAK2247
LoRaWAN Concentrator Cards (mPCIe / SPI)
Multichannel LoRaWAN concentrator module mPCIe SPI · Ref. : 518016
Price on request
RAK7393
Outdoor LoRaWAN Gateways
Outdoor industrial LoRaWAN gateway 8 channels with LTE Cat 4 · Ref. : 715167
Price on request
GW5000A
LoRaWAN Gateways, Concentrators & LPWAN Infrastructure
8-Channel LoRaWAN IoT Gateway Router, IP67, PoE Powered
Price on request
A project? Our engineers build the solution with you.
Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.
Request a quotation







