OFFER

Smart Building kit

This technical page details the smart building kit, connecting LoRaWAN sensors and industrial gateways to BMS networks via open protocols.

Core Technical Architecture and Baseline Hardware

The smart building kit centralizes environmental metrics and metering data for building automation networks. The HENGKO HG808-H transmitter provides relative humidity measurements with an accuracy of ±2% RH and a power draw below 20 mA. Equipped with an IP65 rated enclosure and functioning down to -20 °C, this sensor communicates over RS-485 using standard Modbus. This field device tracks ambient humidity and temperature levels without drift.

Wireless telemetry relies on the RAKwireless 815057 gateway operating across 8 channels on LoRaWAN EU868, equipped with PoE support and a DIN rail mount case. Packets reach the ICP DAS LP-2648 M programmable controller running Linux OS with a quad-core Cortex-A53 CPU. Featuring two LAN ports, DCON Remote I/O support, and Modbus RTU/ASCII Master capabilities, this unit maps sensor points for facility managers.

Modular Alternatives and System Expansion Options

Specific architectural layouts may require hardware alternatives beyond baseline selections. The RAKwireless 715247 industrial gateway router provides four Ethernet ports, Wi-Fi 5 connectivity, VPN tunneling, and MQTT publishing while operating at -20 °C over LoRaWAN EU868 and Modbus. For control architectures requiring high uptime, the ICP DAS RPAC-2658 M programmable automation controller offers a Dual Controller Redundancy system that executes failover switching in 0.2 seconds across up to 32 communication ports.

Expansion options include input modules for digital pulse counting from water, gas, or electricity sub-meters. External high-gain antennas can be added to penetrate thick perimeter walls and metal risers. Uninterruptible DIN rail power supply units protect local gateways from power disruptions. Furthermore, facility operators can incorporate auxiliary Zigbee ambient nodes or Matter wireless devices to extend monitoring coverage without replacing the primary building integration layer.

Site Prerequisites and Customer Equipment Scope

Successful system implementation requires the customer to provide core site utilities and IP network infrastructure. Facility teams must supply standard RJ45 network drops equipped with compliant PoE power to energize remote LoRaWAN gateways. The client must also assign static IP ranges or DHCP reservations on a designated virtual local area network (VLAN) to separate sensor traffic from business IT networks. Clean power outlets inside control cabinets must be ready prior to physical installation.

The client is responsible for supplying the existing building management system register allocation tables, including Modbus addresses or BACnet device instance numbers and login credentials. Authorized physical access to electrical riser shafts, mechanical penthouses, and suspended ceiling spaces must be granted to installation technicians. Finally, the customer coordinates with the supervisory software contractor to enable read and write permissions for real-time field data exchange.

Radio Propagation Analysis and Engineering Checkpoints

Radio propagation planning requires a comprehensive evaluation of structural attenuation across reinforced concrete floor slabs and metallic elevator shafts. These dense construction barriers attenuate sub-gigahertz wireless frequencies, which directly dictates the overall gateway density needed to maintain reliable floor coverage. The buyer must check in the datasheet the receiver sensitivity specifications and transmission power levels to ensure adequate link margin throughout complex indoor environments.

Battery longevity for autonomous wireless sensors depends directly on the configured telemetry reporting interval. Transmitting radio packets at short intervals depletes internal battery cells prematurely, whereas excessively long intervals reduce the responsiveness of facility ventilation control loops. Furthermore, the device commissioning workflow requires systematic registration of distinct DevEUI identifiers and network security keys on the local server to maintain authorized communication channels across the building.

Building Management System Integration and Field Protocols

The gateway and controller layer establishes a direct bridge between low-power field radio networks and existing building automation systems. Protocol selection between BACnet/IP and Modbus TCP is determined by the capabilities of the installed building management equipment. The ICP DAS LP-2648 M controller converts incoming payload packets into standardized register maps, associating environmental measurements from HENGKO HG808-H transmitters with analog input objects readable by central automation software.

This integration middleware systematically manages slave polling cycles and timestamp synchronization to prevent bandwidth saturation on the building backbone. Operating over two independent Ethernet interfaces, the industrial controller completely isolates local field instruments from administrative corporate networks. Facility programmers can configure translation tables and scale sensor values without interrupting active heating, ventilation, and air conditioning control routines, preserving continuous operation across the property.

Project Execution Phases and Site Commissioning Flow

Deploying a smart building system follows a structured series of technical milestones. The engagement starts with an initial site survey examining floor drawings to evaluate wall compositions and determine gateway placement locations. A comprehensive project proposal is prepared on quotation based on required sensor counts and site complexity. Hardware supply includes bench pre-configuration where network masks, LoRaWAN keys, and Modbus registers are mapped into controller memory prior to shipment.

During on-site installation, field technicians mount enclosure housings, connect PoE Ethernet cabling, and power up wireless environmental sensors. Signal strength verification using RSSI indicators confirms wireless coverage for every monitored zone before linking with the central BMS over BACnet or Modbus. Commissioning concludes with technical handover documentation delivered to facility teams, detailing register allocations and scheduled battery replacement procedures.

Bill of materials

Catalogue products that can fill each role. Atlas Electronics quotes the complete bill of materials for your project; you check each datasheet before ordering.

Environmental sensing

HENGKO HG808-H relative humidity transmitter with IP65 enclosure, RS-485 Modbus output, and power draw below 20 mA.

Wireless gateway

RAKwireless 815057 8-channel LoRaWAN EU868 gateway with PoE power input and DIN rail mount form factor.

Controllers

ICP DAS LP-2648 M programmable automation controller with Linux OS, quad-core Cortex-A53 CPU, dual LAN ports, and Modbus RTU/ASCII Master support.

Frequently asked questions

How is the required number of LoRaWAN gateways calculated in a multi-story building?

The gateway count depends on radio signal attenuation caused by reinforced concrete slabs and metal shafts. Typically, a single RAKwireless 815057 gateway covers two to three floors depending on interior wall layout. The buyer must check in the datasheet the receiver sensitivity ratings and conduct an on-site RF survey to eliminate coverage gaps in shielded zones.

Which protocols connect the wireless sensor data to an existing building management system?

Field sensors like the HENGKO HG808-H deliver data over RS-485 Modbus or LoRaWAN wireless transmissions to the local gateway. The ICP DAS LP-2648 M controller then translates these records into BACnet/IP or Modbus TCP registers, enabling direct ingestion by central building management platforms without third-party cloud dependencies.

How does the sensor reporting interval impact expected battery life?

Radio transmissions represent the primary energy expenditure in battery-powered wireless nodes. Setting a reporting interval of fifteen minutes generally yields several years of operational runtime, whereas an interval of sixty seconds significantly reduces battery longevity. Configuration must balance the thermal inertia of the space against HVAC control requirements.

What network parameters must the client configure before connecting the automation controller?

The client must allocate static IP addresses on an isolated virtual local area network (VLAN) and supply PoE network ports for the gateways. Internal routing permissions between the ICP DAS LP-2648 M controller and the building management supervisory server must be configured by network administrators prior to commissioning.

Products mentioned

A project? Our engineers build the solution with you.

Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.

Request a quotation

Related pages