Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DHT11 – Digital Temperature and Humidity Sensor

Digital Temperature and Humidity Sensor

Temperature Sensor Modules

  • RS-485
Manufacturer part number
DHT11
Manufacturer
ACEBOTT

DHT11 digital temperature and humidity sensor module with a single bus serial interface. It converts physical temperature and humidity into a digital signal that acquisition equipment can read directly.

Product overview

Overview. The ACEBOTT DHT11 is a digital temperature and humidity sensor. It combines a resistive humidity sensing device and an NTC temperature sensing device, and converts the measured quantities into a digital signal that acquisition equipment can read directly.

Main characteristics. The sensor has a calibrated digital signal output. Each measurement is sent as 5 bytes: humidity integer, humidity digit, temperature integer, temperature digit, then a checksum byte.

Interface and data integrity. The DHT11 uses a single bus serial interface. The checksum is the low 8-bit binary complement of the sum of the data bytes. If it does not match the last byte sent by the DHT11, the data may be wrong and the reading must be repeated.

Typical uses. This module can be used in a weather station or a temperature and humidity regulator.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote